Researches for the Determination of the ATC Si10Mg Alloy Fatigue Life, Function of Different Applied Thermal Treatment Cycles
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2005, Vol 28, Issue 1
Abstract
The experimental researches which were made, emphasized the opportunity of applying heat treatment cycles, in order to increase fatigue life of ATC Si 10 Mg alloy. The increase of minimum fatigue resistance is approximately 2,5 when complex heat treatment cycles apply.
Authors and Affiliations
Adrian DIMA, Alina MINEA, Iulia-Margareta DIMA
Keywords
Related Articles
- EP ID EP664660
- DOI -
- Views 66
- Downloads 0
Corrosion Behavior of 1050 and 3003 Aluminum Alloys Used in Naval Industry
The most important requests for new materials used in marine aggressive corrosion environment are the corrosion resistance and the susceptibility to localized and pitting corrosion. The corrosion behavior of 1050 and 300...
Nanocomposite Coatings Obtained by Electro-Co-Deposition of Inert Particles with Cobalt–a Review
The paper focuses on review investigations of electrodeposition processes of metallic coatings containing dispersed nanosized particles. The nanosized particles, suspended in the electrolyte by agitation and/or use of su...
Management of the Environmental Risks Identified in an Organization
Response to risk is a process that is directly involved in risk management and is governed by the organization's security strategy, environmental characteristics and security mechanisms. The management identifies the opt...
Influence of the Anodic Oxidation Treatment on the Corrosion Behaviour of Aluminium and Aluminium Alloys
This paper deals with the effect of anodic oxidation treatment on the corrosion behaviour of 6061 aluminium alloy in natural sea water. Anodic oxidation treatment leads to the formation of an amorphous oxide layer on the...
Studies Regarding the Properties Modification of AISI 310S Steel
The paper presents an analysis of classical heat treatments, which can be applied to AISI310S steel samples. The influence of these heat treatments was highlighted by micro-hardness measurements – Vickers method, and als...