Results of Non-Destructive and Destructive Tests of Welded Joints Made of Heat-Resistant Cast Steel GX40NiCrSiNb35-25 in Welding Procedure Qualification
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2017, Vol 61, Issue 2
Abstract
The article presents test results concerning the welding procedure qualification of the production welding of heat-resistant cast steel GX40NiCrSiNb35-25 (1.4852) performed using filler metal WZ 25 35 Zr according to PN-EN ISO 14343. The welding procedure qualification test was performed in accordance with PN-EN ISO 11970. The test joint made using the TIG method (141) was subjected to non-destructive and destructive tests enabling the identification of the mechanical properties of the joint. The test results satisfied the requirements contained in PN-EN ISO 11970 and constituted the basis enabling the preparation of a related welding procedure qualification report.
Authors and Affiliations
Sławomir Parzych
Keywords
Related Articles
- EP ID EP269757
- DOI 10.17729/ebis.2017.2/4
- Views 49
- Downloads 0
Detection of Imperfections in Welded Joints Using the Timeof-Flight-Diffraction Technique (TOFD)
The paper presents the results of research on an ultrasonic testing technique known as the time-of-flight-diffraction (TOFD) technique. The research- related tests involved a 10 mm thick MMA welded butt joint containing...
Technological Properties and Applications of High-Carbon Nanobainitic Steels
Steels belong to the most popular structural materials. Depending on their chemical compositions and applied heat or thermo-mechanical treatment, steels are characterised by various microstructures as well as diverse mec...
Welding of (Super) Duplex Stainless Steel
The article presents and describes in detail duplex steels used in modern sectors of industry (duplex, super duplex, lean duplex and hyper duplex), with particular attention paid to corrosion resistance and primary areas...
Advanced Studies and Developments of the E.O. Paton Electric Welding Institute in Welding and Allied Technologies
The article presents a number of recent solutions developed at the E.O. Paton Electric Welding Institute including technologies and equipment for welding performed using highly-concentrated power sources such as plasma,...
Effect of Plastic Strains in the Shunting Zone on Force Parameters in the Butt Welding of Chain Links
The article presents the development of a method enabling the calculation of force necessary to bend a chain link during butt welding, taking into consideration a plastic strain in the shunting zone. The study also discu...