Review of Railway Track Fault Finding System
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2015, Vol 3, Issue 10
Abstract
In India so many transport facilities is available. In which railway played vital role to transport of Indian population. The Indian population is on second position in world. So, transportation problem is reduced because of Indian railways. India is the second largest country that uses the railway for transport. But, now a day’s so many accident of railways take place & so many people have died & loss of property takes place. This accident takes place due to crack in rails, landslide on the track in hill areas. All trains are in speed, so train driver cannot stop train immediately. Because of that so many accident are take place. Main problem of railway analysis is that detection of crack in track & also landslide in hills areas. This paper is going to gives the idea about detection of crack in track, landslide in hills area. In this project we are going to do the robot. This robot moving between the two station & detect the crack in track, landslide in hills area. This detected information like position where the crack is present & picture of landslide are send to the nearest station. So, Because of this information the station manager will understand that some problem is presenting on track. Because of this we will avoid the accident of train.
Authors and Affiliations
Shrenik S. Sarade, Nikhil D. Chandoba, Manoj R. Sowani , Shishir K. Malusare
Keywords
Related Articles
- EP ID EP21319
- DOI -
- Views 232
- Downloads 6
Comparison Study between 1/2 Rate And 2/3 Rate Convolutional Encoder with Viterbi Decoder
As the need for bandwidth by bandwidth application became extremely alarming, the need to design a good encoders and decoders for the next generation wireless communications system became very imperative. Convolutional...
slugBit Error Rate Performance in Coherent Optical Systems
The probability of a transmitted bit error is generally termed as BER. It is calculated by the ratio of incorrectly transmitted bits to total transmitted bits. Regardless of the data destination, an optical transport sy...
slugFPGA based Stepper motor control using Labview GUI techniques
T h e co n trol te c hn i q u es f o r t h e Stepper m o tor s ys t e m i n w i rel e s s m od e u s in g Har d w a r e D e s c ription L a n g u a g e (...
Large Deflection Analysis of Cantilever Beam Using Artificial Neural Networking
In this study the large deflection of the cantilever beam is analyzed under the action of point load at the free end of the beam. The large deflection of the cantilever beam causes the non linear behavior of beam. This...
Economics of Using Waste Polymer Material as An Alternative to Stone Aggregates in Bituminous Road Pavements
Polymer waste generated at recycled pipe manufacturing plant (locally called jali gulla) is used to obtain an alternative material for stone aggregates. These Waste Polymer Aggregates (WPA) are subjected to different te...