Review of the new state building codes and standards for engineering protection of territories, buildings and constructions from dangerous geological processes in complex engineering-geological conditions
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 67
Abstract
The article provides an overview of the new state building codes (SBC) and standards (GOST) developed at the State Research Institute of Building Constructions (Kyiv, Ukraine). The norms regulate mandatory requirements to be followed in the design, new construction, maintenance and reconstruction of buildings and structures for various purposes, built or placed at sites where soil foundation is characterized by difficult engineering and geological conditions. Based on the results of recent research in the field of construction the following norms have been proposed: SBC B.1.1 xx: 201H “Engineering protection of territories, buildings and constructions of landslides and avalanches. Basic regulations” «GOST-H-B B.1.1 HHH1: 201H» Guidelines for the design of buildings and structures on soil subsidence «GOST-H-B B.1.1 HHH2: 201H» Guidelines for the design of buildings and structures in mined areas « GOST-H-B B.1.1 HHH3: 201H «Guidelines for the design of buildings and structures on weak soils» GOST-H-B SBC B.1.1 HHH4: 201H «Guidelines for the design of buildings and structures in karst areas,» GOST-H SBC B.1.1-HHH5: 201H «Guidance on the preparation and engineering of soil basements», GOST-N-DBN B.1.1 HHH6: 201H «Guidance on scientific and technical monitoring of buildings and constructions».
Authors and Affiliations
V. А. , Titarenko, J. I. , Dombrovskii, V. D. , Shuminskii
Keywords
Related Articles
- EP ID EP323969
- DOI -
- Views 154
- Downloads 0
Effects of the chemical waste production on the peculiarities of the polymerconcrete
A number of researches have been done to identify the cheapest materials and those ones, which are able to perform functions of binders in mortars and concretes effectively. Such materials are wastes of chemical industri...
Determining of the required length of steel anchoring and composite fittings in plankglued wooden constructions
The cohesion of steel and composite fittings with wood through epoxy adhesive has been investigated. Experimental samples of plankglued prisms were tested for the removal of glued fittings. After experimental research, t...
Renewal of air conditioning system of manufacturing premises
An important priority of the economic policy of Ukraine is the careful use of energy. Therefore, a large-scale energy saving policy is being implemented in the country, and energy efficiency objectives are comprehensive...
The effectiveness of use of cellulose ethers in mortars based on alkali-activated slag cement for self-levelling screeds
Generally, water-retaining admixtures based on cellulose ethers are developed for traditional binders (Portland cement and gypsum) systems. However, alkali-activated cements are characterized by an increased alkalinity o...
Increasing the stability of asphalt concrete coating to formation of rutting
The article considers the issues of increasing the stability of the asphalt-concrete coating to the formation of rutting. In recent years, the load on road surfaces has increased. It is known that the quality of bitumen...