Review on Extended Surfaces used in Concentric Tube Heat Exchanger
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
Improving heat transfer in double heat exchanger has led to large number of studies. Double heat exchanger is commonly used in industries due to its simplicity; flexibility had a wide range of applications. One of the methods used in passive technique is use of extended surfaces. This review paper presents increasing heat transfer rate by using fins in double pipe heat exchanger over the previous years but majorly in the last decade in the process of heat transfer. Common methods used for heat transfer improvement are active, passive and compound methods in double pipe heat exchanger.
Authors and Affiliations
M. Lava Kumar, B. Veerabhadra Reddy, K Hemachandra Reddy
Keywords
Related Articles
- EP ID EP672350
- DOI 10.24247/ijmperdoct201993
- Views 151
- Downloads 0
Effect of Friction Stir Welding Processon Mechanical Properties and Microstructure of ZE42 Magnesium Alloy
A new series of magnesium alloys are being developed as due to good properties with any rare earth components. In order to investigate the effects of friction stir welding (FSW) on microstructures and thermo gravimetric...
Design and Analysis of Wheel Hub for Student Formula Car
In the current outline of Wheel centre point utilized for Student equation autos, the brake plates can't be evacuated effortlessly since the circle is mounted in the middle of the knuckle and centre. If there should be a...
An Experimental Investigation and Performance Assessment of a Solar Water Purifier
Drinking water is the most rapidly depleting resource on the earth. But it is also the one, which is taken for granted by most of the population. So to make sure that the future generations can enjoy the life on earth in...
THE COMPARISON OF DEVIATIONS OF FREEFORM SURFACES USING RE-ENGINEERING BY NON-CONTACT SCANNERS
There are various types of optical and Laser 3D scanners used for capturing the point cloud data in reverse engineering approach. The present article deals with the comparison of EINSCAN Scanner and the V5 PERCEPTRON 3D...
The Study and Interpretation of STHE with Computational Fluid Dynamics as Tool
In this work study has been made on the computational fluid dynamics analysis of the shell and tube heat exchanger (STHE). CFD was used for the design and analysis of this heat exchanger. In the analysis water and nano f...