THE COMPARISON OF DEVIATIONS OF FREEFORM SURFACES USING RE-ENGINEERING BY NON-CONTACT SCANNERS
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 2
Abstract
There are various types of optical and Laser 3D scanners used for capturing the point cloud data in reverse engineering approach. The present article deals with the comparison of EINSCAN Scanner and the V5 PERCEPTRON 3D LASER SCANNER for reverse engineering a freeform surface. A freeform surface is modelled and machined using Computer numerical control machine. The multiple scanning operations are done on this physical part by both the scanners individually. The obtained data was converted to ASCII (.asc) file format type and the data is evaluated using Reverse engineering software. In this comparison the standard and deviation distribution are evaluated by comparing the RE-model with original CAD model independently. In conclusion, V5 perceptron has small variation ranges than Einscan when observing the deviation status at pre-defined points(L1 to L18) and percentage of points (Einscan– 13.7% of pts. in range of 0.2300 to 0.3200, V5 Perceptron – 37.2% of pts. In range of -0.0216 to 0.0216) in deviation distribution of each scanners.
Authors and Affiliations
SREERAM REDDY GUNDETI, SREE KRISHNA GUTHENA
Keywords
Related Articles
- EP ID EP222578
- DOI -
- Views 118
- Downloads 0
A Study on the Effects of Heat Treatment on the Mechanical Properties of Aluminium Alloy (ADC 12) Reinforced With Iron Oxide (FE2O3)
The mechanical properties of an Al–Si–Cu alloy (ADC12) reinforced with iron oxide, produced using different Heat treatment to process is examined experimentally. Experimental studies were carried out for ADC 12, ADC 12 +...
Thermal and Solutal Buoyancy Effects on Mixing of Opposed Laminar Jets in a Two-Dimensional Passive Mixer at a Higher Reynolds Number
Numerical analysis of two opposing streams of different fluids having different temperatures (same phase, miscible) in a 2-D adiabatic channel, is numerically investigated in the mixed convection laminar flow regime. The...
A Frequency based Free Vibration Analysis of a Hat Stiffened Plate for Identification of the Damage
Hat section has excellent properties, in bending about its both principal axes. Due to this property, hat section is generally used to increase the strength of the parent structure. Therefore, hat stiffened structures, f...
DESIGN OF ANARSA MAKING MACHINE
Due to increase in population the need of food products and its daily consumption is higher, hence the food production need to be improvised with latest technology. An attempt is made to produce the traditional Indian sn...
Manufacturing of Proto Type Wind Turbine Blades Using Rapid Prototype Technology
All over the world, the wind energy has numerous benefits in helping to provide a source of clean and renewable electricity. For greater use of wind energy, the research efforts are aimed at addressing the challenge. The...