Robot Force Control Methods
Journal Title: Mašinstvo - Year 2016, Vol 13, Issue 2
Abstract
Robot manipulators are usually used in many industrial apllications where a number of practical tasks should be executed. The very important part of that execution is interaction between robot and environment. Control of the interaction is crucial for successful execution of industrial processes. Typical applications include deburring, machining, assembly, polishing, welding and others. The main problem is to find or to choose a proper strategy to control contact force between robot and environment. There are two basic methods of robot force control: • Indirect force control • Direct force control. The main content of this paper is a brief description of these methods and experimental determinatiom of maximal contact forces, depending on the configuration and the speed of the robot arm Experimental work has been done using robotic system FESTO RV2AJ with the help of piezoelectric dynamometer KISTLER 5070. The results of measuring are presented and analyzed by table and graphic. According to results of analysis the proper and useful conclusions are made which are pointing on the importance of robot force control for successful execution of practical tasks.
Authors and Affiliations
Sedin Murtić, Edin Begović, Malik Čabaravdić
Keywords
Related Articles
- EP ID EP303833
- DOI -
- Views 62
- Downloads 0
Finding the Actual Causes of Hydraulic Cylinder Fault
Hydraulic cylinder malfunctions are very common causes for the failure of the operation of the hydraulic system. Most common causes are in cylinder’s seal failure, whereby the error by replacing the seals can be relative...
Co-processing of Municipal Waste as Alternative Fuel in Cement Industry
This paper presents the results of the activities of Kakanj cement Plant and the German organization GIZ carried out during the Project: „Coprocessing of municipal waste as alternative fuel in cement industry“ in period...
Toughness and Fatigue Analysis of Al 6xxx Alloys
Mechanical properties of every material play important role during material selection for any mechanic system. The main mechanics property which is crucial for material selection is Toughness. The paper present some of t...
Analysis of Water Evaporation in Twin Screw Compressors Using CFD
Twin screw compressors are extensively used in applications which require pressures higher then allowable pressure in oil free compressors but would benefit from oil free operation such as food processing, pharmaceutical...
Analysis of Structural Requirements Necessary for Stable Operation of Buses
Today's modern vehicles for mass transport of passengers, of which the most common representatives are the buses must comply with the requirements of comfort, wide usage, and in particular the measures of safe driving. I...