Robotic CMT arc braze welding of 10CrMo9-10 steel tubes with internal copper lining
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2018, Vol 62, Issue 5
Abstract
The article presents issues related to arc braze welding of tubes made of 10CrMo9-10 (10H2M) boiler steel lined inside with copper. In addition, the study points to possibilities of producing joints using conventional and innovative welding methods as well as presents results of radiographic, metallographic and mechanical tests (static tensile test, technological bending test, hardness measurements) of braze welded joints made using a robotic braze welding stand and the CMT (Cold Metal Transfer) method.
Authors and Affiliations
Zbigniew Mirski, Tomasz Wojdat, Paweł Kustroń, Wiesław Dreko, Leszek Mroczkowski Mroczkowski
Keywords
Related Articles
- EP ID EP426536
- DOI 10.17729/ebis.2018.5/4
- Views 58
- Downloads 0
Batteries need strong connections – are resistance, laser and micro TIG welding the best suited joining technologies?
The contacting of battery cells is very essential and technologically challenging step during the battery pack manufacturing. The goal is to achieve best weld joint without defects to enable high current flows. This requ...
The importance of an integrated quality assurance system in professional qualification development and implementation
The increasing pace of technological changes in manufacturing is reducing the useful life of formal qualifications. High level monolithic qualifications require large amounts of effort to review and revise them, especial...
Verification of Properties of Joints Made of Advances High Strength Steels in the Conditions of the Complex Thermal Cycles of the HPAW Process
The article discusses the primary issue related to the verification of properties of joints made in AHSS in relation to conventional structural steels and based on the identification of cooling time t8/5. The solution su...
Quality Assessment of Welded Joints Using TOFD Technique in View of Requirements of Current Standards
The article describes the classification and evaluation of TOFD indications according to PN-EN ISO 10863 and PN-EN ISO 15626 as well as identifies, discusses and illustrates numerous examples of typical problems connecte...
Ultrasonic Tests of FSW Joints of Thicknesses Below 8 mm
The article presents results of ultrasonic tests concerning 6 mm thick FSW joints made of aluminium grade 2017. The tests were performed using joints with artificial post-weld welding imperfections and joints characteris...