Robust and Efficient Controller to Design a Standalone Source Supplied DC and AC Load Powered by Photovoltaic Generator
Journal Title: American Journal of Engineering and Applied Sciences - Year 2016, Vol 9, Issue 4
Abstract
Abstract The present work describes the analysis, modeling and control of a cascade DC-DC and DC-AC power conditioning stage to control a output voltage to supply a DC and AC load systems. To maximize energy extracted from PV generator and control output voltage a RCC MPPT and backstepping controller are designed. The stability of the control algorithm is demonstrated by means of Lyapunov analysis. The achievement of the DC-DC and DC-AC conversions and the efficient PV's energy extraction are validated with simulation results. Copyright © 2016 Hassan Abouobaida. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Authors and Affiliations
Hassan Abouobaida
Keywords
Related Articles
- EP ID EP202266
- DOI 10.3844/ajeassp.2016.894.901
- Views 94
- Downloads 0
SFAD2H: Selective Forwarding or Dropping Attack Detection with 2-Hop Acknowledgment Support in Wireless Sensor Networks
SFAD2H: Selective Forwarding or Dropping Attack Detection with 2-Hop Acknowledgment Support in Wireless Sensor Networks Prathap Uppara, Kiran Krishnappa, Deepa Shenoy Punjalkatte and Venugopal Kuppanna Rajuk DOI : 10.3...
Yield at Thermal Engines Internal Combustion
Abstract The paper presents an algorithm to set the parameters of the dynamics of the classic mechanism the main of internal combustion. It shows the distribution of the forces (on the main mechanism of the engine) on e...
Energy Audit of Health Care Facilities: Dynamic Simulation of Energy Performances and Energy-Oriented Refurbishment of System and Equipment for Microclimatic Control
Abstract Topic of the study is the investigation of potentialities of energy simulation for optimizing the building refurbishment, by taking into account impacts of both envelope renovation and HVAC system selection. En...
Fabrication and Tensile Property Analysis of Polymer Matrix Composites of Graphite and Silicon Carbide as Fillers
Fabrication and Tensile Property Analysis of Polymer Matrix Composites of Graphite and Silicon Carbide as Fillers Vikram G. Kamble and Naveen Kumar L. DOI : 10.3844/ajeassp.2016.17.30 American Journal of Engineering an...
Effect of Parameters of Selection and Replacement Drilling Bits Based on Geo-Mechanical Factors: (Case Study: Gas and Oil Reservoir in the Southwest of Iran)
Effect of Parameters of Selection and Replacement Drilling Bits Based on Geo-Mechanical Factors: (Case Study: Gas and Oil Reservoir in the Southwest of Iran) Arzhang Nabilou DOI : 10.3844/ajeassp.2016.380.395 American...