Rotor Position Detection of Switched Reluctance MotorsViaTransient Voltage Suppressor Circuits
Journal Title: International Research Journal of Applied and Basic Sciences - Year 2013, Vol 5, Issue 6
Abstract
This paper presents newsensorless rotor position detection for a Three-phase single switch SR motor with regeneration capability at standstill mode. The proposed method is based on the dependency of phase current waveform at turn off time to rotor position angle. It is shown that the combination of a motor with single switch per phase converter and a transient voltage suppressor (TVS) circuit define a resonant circuit. It means, the resonance frequency of the circuit depends on the rotor position. In this method, the rotor position is achieved by inspecting of regeneration current results of applied high frequency and low level diagnostic pulses to the motor phases at the beginning step. To obtain the rotor position of switched reluctance motors (SRMs) by meaning of the overlap of rising voltage measurements. During this interval, rotor position is detected by exchanging energy between the phase and source repeatedly in one cycle of a phase current. The resulting current magnitudes are measured and compared to detect the rotor position. The new configuration enables the motor for self-starting without any other mechanism or starting device. The prototype controller was simulated, fabricated, and tested in laboratory and experimental results of the proposed SRM drive system are presented.
Authors and Affiliations
S. H. Pishgar| Department of Electrical Engineering, West Tehran Branch, Islamic Azad University, Tehran, Iran, M. Asgar| Department of Electrical Engineering, ShahidBeheshti University, G. C., Tehran, Iran,, A. Siadatan| Department of Electrical Engineering, ShahidBeheshti University, G. C., Tehran, Iran,email:a_siadatan@ wtiau.ac.ir
Keywords
Related Articles
- EP ID EP5954
- DOI -
- Views 259
- Downloads 7
Investigation of PWM using Sinusoidal Waveform as a Career Signal for Reduction of Magnitude of Specified Harmonics
Many researchers have been done on PWM switching methods for finding better ways to supply the loads, which have lower harmonics in outputs. Applying of triangular career signal in SPWM is a common way. In this paper, th...
The Impact of Brand Extension on New Product from Customers’ Perspective
Today, most manufacturers distribute their new products under the brands of previous successful products since one of the most valuable properties of each organization is its background and how it is perceived as a reput...
Offering a model for determination of optimal warranty period and production price
Nowadays warranty is an important element in marketing, especially for the products that enter the market for the first time. Usually customers do not have enough information about productions efficiency, in such conditi...
A study of the effects of planting date on some morphological qualities of grain corn 540, 647, and 704 in the environmental conditions of Darrehshahr
In order to study the effects of planting date and cultivar on some morphological qualities of corn, a study was done in environmental conditions of Darrehshahr in 1384. The study was done in split plot design and based...
The Impact of the Ninth and Tenth Government Policies on Transportation of the Province Of Sistan and Baluchestan
This study used descriptive with survey approach to examine the effectiveness of ninth government policies on the living conditions of Sistan and Baluchestan province. Population is all practitioner sin the 2014 and samp...