ROUGHNESS OF 1.0721 STEEL AFTER CORROSION TESTS IN 20% NaCl
Journal Title: Production Engineering Archives - Year 2017, Vol 0, Issue
Abstract
Non-alloy quality case-hardening steels are used for low-load components made on automatic machining centers (automatic lines). Because of the widespread use of these steel in open constructions, they are exposed to atmospheric corrosion. The study attempted to analyze the effect of 20% aqueous NaCl solution on the roughness of the steel as a result of corrosion. The steel roughness and corrosion wear were determined according to corrosion time.
Authors and Affiliations
Tomasz Lipiński
Keywords
Related Articles
- EP ID EP271315
- DOI -
- Views 81
- Downloads 0
Supervision of measuring equipment based on risk management and ISO 9001
The study presents the results of analysis of the possibilities of measuring equipment supervision, taking into account the requirements of the ISO 9001: 2015 standard and risk management present there. As it has been sh...
Using the Shewhart control charts by process control
This article deals with the statistics pursing the process capability of turning in screws production in RIBE Slovakia, k.s. In technical prac-tice, an important group of statistic methods is formed by analyzing qualific...
Additional components of risk assessment and their impact on the probability parameter
The article raises the issue of risk assessment and its impact on the quality and safety of work. During the assessment of the turning lathe position additional components associated with the jobs personalization were ta...
Technical aspects of casting and their effect on the quality of Remanium CSe dental alloys
The study concerns on investigation of Remanium CSE alloy, one of the dental alloys used in metal-ceramic connection preparation. The alloys based on Ni-Cr-Mo are widely used in dental engineering because of their high m...
Evaluation of service conditions of the machines within the furniture joinery
The aim of this thesis is to present the operation of machines within the furniture joinery, presentation of the risks for this branch, discussion of quality and technical documentation within the analysed enterprise, ch...