Розробка автоматизованої системи управління температурним режимом випікання хлібобулочних виробів із використанням нечіткого контролера
Journal Title: Challenges and Issues of Modern Science - Year 2024, Vol 3, Issue 1
Abstract
Purpose. The purpose of the work is to improve the main indicator of the economic efficiency of the production of bakery products - the saving of electricity for heating inside the chamber. Design / Method / Approach. Achieving the goal in the work is carried out by eliminating the possibility of supplying excess heat from heaters by modernizing the automated baking temperature control system. A mathematical model of the automated control system for the temperature mode of baking in a tunnel-type bakery oven was developed using the methods of designing intelligent control systems. The technological process is controlled using a fuzzy controller. Findings. Control of the parameters of the internal environment in the cameras was achieved by automated control of actuators. Conducting the technological process from start to finish without operator intervention provides the possibility of remote change of baking modes without stopping the process. Control algorithms the technological process of baking bakery products have been developed, which exclude incorrect operations. Theoretical Implications. According to the results of theoretical research on the mathematical model of the fuzzy control system of the technological process of the production of bakery products, surfaces of the fuzzy control of the technological process of baking by capacity and humidity were obtained. Practical Implications. The proposed automated system for controlling the temperature mode of baking bakery products, the operation of the heater and humidifier is adjusted by a fuzzy controller. Originality / Value. The simulation results show that the use of fuzzy controllers in automatic control systems allows controlling temperature and humidity at the stages of bread baking. Research Limitations / Future Research. The fuzzy controller proposed in the article can control the power of the heater in three positions, the humidity level in three levels, and the baking stage in 3 stages. Paper Type. Practitioner Paper.
Authors and Affiliations
Олексій Разживін, Анастасія Люта, Олександр Сімкін, Артем Залятов
Keywords
Related Articles
- EP ID EP753114
- DOI https://purl.org/cims/2403.011
- Views 40
- Downloads 3
Оцінка впливу збройної агресії Росії на стан атмосферного повітря в Україні
Purpose. The article is aimed at identifying the sources of the negative impact of Russia's armed aggression on the atmospheric air in Ukraine and the consequences of the influx of harmful substances from them on the hea...
Microplastics in agricultural soils: sources and microbial remediation approaches
Purpose. The purpose of this study was theoretical analysis of the sources of microplastics in agricultural soils, its impact on agroecosystems and microbial remediation approaches to remove microplastics from the soil....
Інтегрування нестаціонарних систем оптимального керування із післядією та нестабільним спектром
Purpose. We considered a non-stationary optimal control system with delay. Non-stationary optimal control systems are described by systems of differential or differential-algebraic equations. Variable coefficients do not...
Homogeneous Model in Finite Element Analysis for Natural Frequency Calculation of Axisymmetric Shells
Purpose. The article aims to provide practical recommendations for calculating natural frequencies in axisymmetric shells using finite element methods. It focuses on the need to develop a simplified model that can be use...
Using micro:bit for building distributed sensor networks in robotic systems
Purpose. The purpose of the paper is to explore the possibilities of integrating the micro:bit microcontroller with external devices through UART, I2C, and SPI protocols to create modular and distributed sensor networks...