Safety management system of subcontractors’ works in foundry companies
Journal Title: Archiwum Odlewnictwa - Year 2010, Vol 10, Issue 3
Abstract
Most companies use the services of subcontractors, either in their core business, or to support the work – e.g. maintenance. This poses the need for effective and systematic monitoring of the work of subcontractors, especially if they perform it on the premises of an enterprise. In some industries such as construction, energy, petrochemicals, metallurgy and foundry additional system requirements appear, particularly with regard to safety and the environment, a compliance with which is necessary to obtain an order. Often, conformity with these requirements must be confirmed with a certificate. The article presents examples of standardised special requirements, such as SCC / VCA, SCT / VCU, SQAS used for sub-contractors of construction work, maintenance, scaffolding etc. in the European Union member states.
Authors and Affiliations
M. Rączka
Keywords
Related Articles
- EP ID EP72196
- DOI -
- Views 96
- Downloads 0
Applying RP-FDM Technology to Produce Prototype Castings Using the Investment Casting Method
The research focused on the production of prototype castings, which is mapped out starting from the drawing documentation up to the production of the casting itself. The FDM method was applied for the production of the 3...
Thermal analysis and microstructure of master alloys used for modification of silumins
The study presents the technological backgrounds of the process of melting and casting Al-Co, Al-Ni, and Al-Ti master alloys, used as refiners of the microstructure of cast silumins. Basing on the analysis of phase equil...
Use of barbotage refining of aluminumsilicon alloy to improve mechanical properties of high pressure die castings
This study presents the research results of the influence that barbotage refining on the mechanical properties of high pressure die casting made of AlSi12S alloy. The operation of refining was conducted in a melting furn...
Structure and mechanical properties as well as application of high quality vermicular cast iron
The results of studies on the use of magnesium alloy in modern cored wire injection method and Tundish for production of vermicular graphite cast irons were described. The injection of Mg cored wire length is a treatmen...
Structure of carbon steels after remelting of the surface layer with the electric arc
This study presents results of a research on the enhancement of properties of the surface layer of carbon steels by treating it with a concentrated heat stream utilizing the GTAW method. Remelting of the surface layer of...