Selection of Machining Parameters of Face Milling operation for Aluminium with HSS cutter using Response Surface Methodology and Genetic Algorithm
Journal Title: JOURNAL OF ADVANCES IN CHEMISTRY - Year 2016, Vol 12, Issue 16
Abstract
Components used in chemical equipments are produced from forging, extrusion and casting processes with classic dimension tolerances due to its producing ability. So machining processes were introduced for close tolerance assembly and improve the product working efficiencies. At present, lot of machining processes are available for producing chemical equipments such as turning, milling, drilling and grinding etc.,. Milling operation is playing critical role on making the chemical equipment’s components with high accuracy and higher productivity. Face milling operation is one of the milling processes which is used for achieving higher flatness and surface finish of chemical equipment’s parts. Thiswork concentrates the parameters influence on Material Removal Rate (MRR) and Surface Roughness (SR) by using aluminium as work piece material. Actually, aluminium alloy has the most significant in chemical industries because of its inherent properties such as, corrosive resistance , low weight to strength ratio. The milling parameters such as feed rate, spindle speed  and depth of cut are selected as parameters for improving the quality and productivity. This work put together the link between input and response variables for developing the face milling performances. The Response Surface Methodology (RSM) is employ for making the link between dependent and independent variables. Building the empirical model by conducting regression analysis The performance of developed regression models are verified with experimental results. Verification results show the developed models have best agreement with experimental results. The developed models are used for achieving the best input parameters by using Genetic Algorithm (GA). Finally, the optimal parameters are evaluated by GA.
Authors and Affiliations
Kannan. S, Suresh Kumar B, Baskar. N, Varatharajulu. M
Keywords
Related Articles
- EP ID EP652975
- DOI 10.24297/jac.v12i16.3001
- Views 162
- Downloads 0
Synthesis, characterization, antibacterial, antioxidant and anti-inflammatory activities of new 4-Aryl-2-amino-6-(4-hydroxy coumarin-3-yl) pyridine-3-carbonitriles derivatives
This study aimed for the synthesis of 4-Aryl-2-amino-6-(4-hydroxy coumarin-3-yl) pyridine-3-carbonitriles 4 suitable for use as antibacterial, anti-oxidant and anti-inflammatory activities via a versatile, readily access...
Sol-Gel Synthesis, Magnetic and Optical Properties of Co2+:Nd3+::2:1 molar ratio doped in SiO2
Synthesis of Co2+:Nd3+::2:1 molar ratio doped SiO2 with Co2+ ions concentrations viz. 0.0004, 0.001, 0.002, 0.003, 0.004 moles in S1-S5, respectively are performed by sol-gel method. Observed values of the densities an...
The Salts of Nitronic acid as CO2-Corrosion Inhibitors
The salts of nitronic acids were obtained by nitration of higher olefins, both normal and isomeric structure in the presence of aqueous alkali. The resulting salts (Na+, K+, NH4+), were tested in CO2 -media as a corrosio...
Electrochemical Determination of Trichloroacetic Acid using Platinum Electrode
The electrochemical reduction of Trichloroacetic acid (TCA) on a platinum electrode by cyclic and linear sweep voltammetry was described. The measurements were investigated under optimized conditions. The supporting elec...
A-Alkenoyl Ketene S,S- and N,S-Acetals As Starting For Unexpected and Novel Synthesis of N-Heterocycles
A series of N-heterocycles such as diazaspiro-[4.5]decane, pyrazolo[4,3-d][1,2]-diazepine, imidazo[3,2,1ij][1,8]naphthyridine derivatives or pyrazolo[3,4-b]pyridin-4-ol were synthesized using a-alkenoyl-, a,a...