Selective Growth of 1D Nanostructures Oxide Materials Using PDMS Stamp
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 1
Abstract
The approach for selective growth of 1D nanostructured oxide materials using poly (dimethylsiloxane) (PDMS) stamp consists of using microcontact printing, as such the soft lithography technique, for transferring the pattern of ZnO film on a substrate, followed by the hydrothermal growth of 1D nanowires on patterned areas. The nanowires have been grown in aqueous solutions of zinc nitrate at temperature at 95°C. The wettability of the glass and of the Si/SiO2 substrates was investigated by contact angle measurements. The morphology of the nanostructures obtained was characterized by optical microscopy and scanning electron micoscopy.
Authors and Affiliations
Anca-Ionela DANCIU, Viorica MUSAT, Tito BUSANI, Alexandra GONÇALVES, Joana V. PINTO, Mafalda COSTA, Iwona BERNACKA-WOJCIK, Rodrigo MARTINS, Elvira FORTUNATO
Keywords
Related Articles
- EP ID EP625579
- DOI -
- Views 62
- Downloads 0
Mechanical Resistance on Cold Welding Achievement between Cogged Surfaces
Cold welding on cogged surfaces is a technology developed by researchers from Robotics and Welding Department, Dunarea de Jos University of Galati. Easily deformable samples, having plane surfaces, are pressed on cogged...
The Influence of Friction Forces in Metal Powders Compaction Process of Stainless Steel 316L
The purpose of this study is to determine as precisely the influence of friction in the compaction of powders, and "conversion" of it, increasing densification. The process is intended to be used in the compaction of har...
Particularities of the Management System for Phone Mobiles Waste in Romania
The main objective of this paper is to characterize the management system for mobile phones in Romania. The dimension of cell phone waste flow and the problems related to the collecting and recycling of this waste were c...
Structure and Corrosive Firmness of Composition Materials on the Basis of Copper and Molybdenum Got Method Electron-Beam Technology
The article describe the study of corrosive firmness of composition materials on the basis of copper, obtained by EB-PVD method. Corrosive firmness of condensates was explored by gravimetric method. The especially decrea...
Evolutionary Perspectives on Energy Consumption of Raw Materials to Ensure Energy Production in the EU-28
A clear analysis of the electricity production and consumption sector in the EU 28 offers firstly the possibility of knowing the final energy consumption for each segment (industry, households, trade, services and transp...