Shear and Seismic Performance Analysis of New Component Connection Schemes for Urban Rail Transit Prefabricated Underground Stations
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 4
Abstract
Objective To further promote the application of underground prefabricated structures in urban rail transit projects, research on key technologies (especially new component connection schemes) is conducted for the entry/exit construction of open-excavation prefabricated urban rail transit stations. Method A prefabricated entry/exit structure for urban rail transit stations is designed, consisting of two same-sized unequal C-shaped standard components spliced together (with two transverse cracks). Based on this structure, a new type of component connection scheme is proposed. Through model experiments and numerical simulations, the shear and seismic performance of the new connection node is studied. Under different loading conditions, various performance indicators, such as load-displacement curve, shear behavior, seismic energy dissipation, and ductility are obtained to validate the reliability of the new connection node. Result & Conclusion The shear bearing capacity of the prefabricated component sections is significantly higher than that of traditional cast-in-place sections. The presence of section steel can ensure the shear resistance capacity of the specimen. The ′socket interface+section steel insert plate′ is a reliable connection method, with its various performances roughly equivalent to those of the cast-in-place specimens. Changes in the insertion length of the section steel have minimal impact on cracks at the joint and their maximum bearing capacity. It is recommended to choose a steel insertion length that is consistent with component thickness.
Authors and Affiliations
Huahai ZHOU
Keywords
Related Articles
- EP ID EP734173
- DOI 10.16037/j.1007-869x.2024.04.027
- Views 86
- Downloads 0
Design and Construction Optimization for Elevated Long-link Seamless Urban Rail Transit Station with Bridge-building Unified Structure
[Objective] The elevated long-link seamless station with bridge-building unified structure integrates building and bridge and enables the station pier column to have stiffness requirements while possessing the characteri...
Construction Scheme with Non-stop Aviation for Large-diameter Shield Tunnel Crossing Airport Flight Zone in Karst Area
[Objective] To achieve non-stop aviation during the construction of a large-diameter shield tunnel crossing the airport flight zone in karst area, it is essential to study the construction scheme with non-stop aviation....
Research on Far-field Eddy Current Testing Method for Riveting Clearance Classification of Metro Vehicle Casting Component
Objective Riveting quality issues cannot be visually judged. By employing the far-field eddy current testing method, internal quality defects in riveted structural components can be detected, providing theoretical and te...
Identification Method for Missing Cotter Pins in Catenary Systems Based on Stacked Denoising Autoencoder Network
Objective When using convolutional neural networks (CNNs) for the state detection of catenary system cotter pins, the imbalance between positive and negative samples leads to a low detection rate of missing pins in the n...
Simplified Calculation Method for Existing Tunnel Settlement Caused by Shield Under-passing Based on Timoshenko-PasternakModel
Objective It is aimed to tackle the inefficient accuracy of traditional Euler-Bernoulli beam and Winkler foundation model in calculating settlement induced by shield under-passing existing tunnels. Method Based on the Ti...