SHIELDING OF A UNIFORM ALTERNATING MAGNETIC FIELD USING A CIRCULAR PASSIVE LOOP
Journal Title: Електротехніка і Електромеханіка - Year 2015, Vol 0, Issue 2
Abstract
The magnetic and electromagnetic shields are used to reduce the magnetic field in local spaces. Usually these shields are implemented in the form of a box or a cylinder. At the same time the magnetic field reduction in local spaces by means of passive loops is not considered in detail yet. So, the present study considers shielding capabilities of a circular passive loop. The authors have performed an analytical and numerical modeling of a process of a uniform harmonic magnetic field shielding. The simulated results permit to find out the spatial distribution of the shielded magnetic field. Dependencies of shielding effectiveness on the passive loop radius and cross-section are determined. Moreover, the non-monotonic behavior of the loop radius dependence is shown. We have substantiated that the shielded volume of a circular passive loop is advisable to limit by the sphere with a half loop radius. Presented results give parameters of the circular passive loop that reduces the rms value of the magnetic flux density by 30 %.
Authors and Affiliations
V. S. Grinchenko, K. V. Chunikhin
REQUIREMENTS FOR DEVICES FOR VERTICAL ELECTRICAL SOUNDING OF SOIL AT DIAGNOSTICS OF GROUNDING DEVICES
Purpose. Creation the scientific requirements for technical characteristics of equipment for vertical electrical sounding based on the electrophysical characteristics of the soil of energy objects with the different volt...
APPLICATION OF A RELATIVE TECHNICAL LEVEL INDEX METHOD TO INDUCTION MOTOR OPTIMIZATION PROBLEMS
On the basis of a method of relative technical level indices with relative geometric controlled variables, analytical expressions are derived to determine the optimum geometric dimensions of the squirrel-cage induction m...
ANALYSIS AND DEVELOPMENT OF THE BUBBLE MODEL OF THE FORMATION STAGE OF HIGH-VOLTAGE BREAKDOWN OF THE WATER GAP
Purpose. A high-voltage underwater electric explosion, realized by discharging a capacitor into a water gap, is characterized by three main stages: the stage of formation of the plasma channel, the channel stage and post...
METHOD OF DETERMINING THE START TIME OF INDUCTION MOTORS IN THE CONTROL OF RESISTOR-THYRISTOR MODULES
Purpose. An electric general-purpose drive with asynchronous motor is proposed. For motor control in stator and rotor, circuits used resistors and thyristors. These elements included together in various ways. This allows...
CHARACTERISTICS OF A 4-PHASE VALVE RELUCTANCE MOTOR WHEN POWERED BY UNCAPACITOR SWITCHBOARD
Purpose. Nowadays more and more in a variety of machines and mechanisms applied switched reluctance motor. When designing these engines solve the problem selection switch. While the switch scheme comprises symmetrical br...