Simulation and RTDS Hardware Implementation of SHAF for Mitigation of Current Harmonics with p-q and Id-Iq Control Strategies Using PI Controller

Journal Title: Engineering, Technology & Applied Science Research - Year 2011, Vol 1, Issue 3

Abstract

Control strategies for extracting the three-phase reference currents for shunt active power filters are compared, evaluating their performance under different source conditions in MATLAB/Simulink environment and also with Real Time Digital Simulator (RTDS) Hardware. When the supply voltages are balanced and sinusoidal, the two control strategies are converging to the same compensation characteristics but when the supply voltages are distorted and/or un-balanced sinusoidal, these control strategies result in different degrees of compensation in harmonics. The p-q control strategy is unable to yield an adequate solution when source voltages are not ideal. Extensive Simulations are carried out with PI controller for both p-q and Id-Iq control strategies for different voltage conditions and adequate results were presented. The 3-ph 4-wire SHAF system is also implemented on RTDS Hardware to further verify its effectiveness. The detailed simulation and RTDS Hardware results are included.

Authors and Affiliations

S. Mikkili, A. K. Panda

Keywords

Related Articles

Modeling a Small Punch Testing Device

A small punch test of a sample in miniature is implemented in order to estimate the ultimate load of CrMoV ductile steel. The objective of this study is to model the ultimate tensile strength and ultimate load indentatio...

Optimal Power Factor for the Reactive Load of Small Hydro Power Plants

This article explores the operation algorithm of an excitation regulator of synchronous generators of small Hydro Power Plants (HPPs). The aim is to provide optimum economic parameters, consistent with the dynamically ch...

Simulation and Modeling of a Five -Level (NPC) Inverter Fed by a Photovoltaic Generator and Integrated in a Hybrid Wind-PV Power System

A distributed hybrid coordinated wind photovoltaic (PV) power system was proposed in this paper. As oil and coal reserves are being depleted whilst at the same time the energy demand is growing, it is important to consid...

A Five-Level Current-Source Inverter for Grid-Connected or High-Power Three-Phase Wound-Field Synchronous Motor Drives

Simple converter structure, inherent short-circuit protection and regenerative capability are the most important advantages of current-source inverters (CSI’s) which have made them suitable for medium-voltage high-power...

Flexural Stress-Strain Behavior of RC Beams made with Partial Replacement of Coarse Aggregates with Coarse Aggregates from Old Concrete: Part-2: Rich Mix

Crowded city centers pose serious problems of infrastructure and associated facilities. Construction industry is obliged to opt for vertical construction in place of short height structures in order to meet with the need...

Download PDF file
  • EP ID EP84794
  • DOI -
  • Views 352
  • Downloads 0

How To Cite

S. Mikkili, A. K. Panda (2011). Simulation and RTDS Hardware Implementation of SHAF for Mitigation of Current Harmonics with p-q and Id-Iq Control Strategies Using PI Controller. Engineering, Technology & Applied Science Research, 1(3), -. https://europub.co.uk/articles/-A-84794