Simulation of Dynamic Processes of Gas Flow in Collector Systems
Journal Title: Energy Engineering and Control Systems - Year 2015, Vol 1, Issue 2
Abstract
By using CFD-simulation, plug length simulation of local resistance type plugged tee, which changes the flow direction, using equations of hydrodynamics was carried out. During simulation, velocity of medium in the thread of the collector system in which local input resistance was plugged tee, which changes the flow direction, was measured. Herewith for determination of this velocity and reduction of its distortion collector system simulation at different plug lengths was carried out. Plug lengths of local resistance type plugged tee, which changes the flow direction, where the distortion of flow rate diagram disappears, were determined. The equation for calculating length of the thread of the collector system to the place where distortion of gas flow rate disappears, to the plug length of local resistance type plugged tee, which changes the flow direction was obtained.
Authors and Affiliations
Leonid Lesovoy, Volodymyr Kuzyk
Keywords
Related Articles
- EP ID EP255558
- DOI 10.23939/jeecs2015.02.111
- Views 94
- Downloads 0
Investigation of Sensor for Measurement of Rotation Angle of Sensitive Element in Rotational Paper Pulp Consistometer
This paper presents the results of theoretical and experimental testing of an optical rotation angle sensor of rotational paper pulp consistency meter. It is suggested that a specialized device consisting of two discs wi...
Reduction of Hydrodynamic Flow Measurement Error of Chordal Ultrasonic Flowmeter
In this work, ways of reducing the hydrodynamic flow measurement error of chordal ultrasonic flowmeter for the distributed location schemes of their acoustic paths are investigated. The method of calculating optimal loca...
Design of Optimal Filter for Analog Signal
The technique for designing the optimal value of the filter time constant for analog signal is presented in the paper. This technique is based on the objective function which takes into account the quality index of the f...
Technique for Evaluating the Uncertainty of Enthalpy of Water and Steam for Thermal Energy Metering Systems
The paper presents an analysis of existing techniques for calculating the enthalpy of water (steam). Based on the analysis the techniques were defined that should be applied for computer-aided design of thermal energy me...
Construction of Empirical Models of Complex Oscillation Processes with Non-Multiple Frequencies Based on the Principles of Genetic Algorithms
A method for constructing the empirical models of complex processes has been developed on the basis of genetic algorithms which, compared to the inductive method of self-organization of models, significantly reduces comp...