Simulation of Micro Wind Turbine Blade in QBlade
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 4
Abstract
This paper consists of design and optimization of micro (less than 1 KW) wind turbine blades at rated wind speed 8.4 m/s. SG6043 airfoil is selected as it gives maximum lift coefficient of 1.63. Simulation of blade length of 1.2m is done by using Q-blade software and optimized values of chord length and twist angle at each respective section are calculated by mat lab programming. Multiple parameter BEM simulation is done in Q-blade and graphs of and power is plotted against tip speed ratio. While considering the rotor radius flange, hub and shaft radius is considered in it. Maximum value of power coefficient ( )at rated wind speed of 8.4 m/s is observed to be 0.45 in Q-blade simulation.
Authors and Affiliations
Mr. Shubham Raut, Mr. Shubham Shrivas, Mr. Rohan Sanas, Mr. Navjyot Sinnarkar, Prof. M. K. Chaudhary
Keywords
Related Articles
- EP ID EP23755
- DOI http://doi.org/10.22214/ijraset.2017.4048
- Views 410
- Downloads 12
Evaluating the Effectiveness of Detecting Small Delay Defects Using Signature Analysis Technique and Scan Design
This paper presents a delay measurement technique using signature analysis, and a scan design for the proposed delay measurement technique to detect small-delay defects. The proposed measurement technique measures the d...
Delamination Analysis of GFRP Composites by using Drill Tool
A composite material can be defined as ‘a multiphase material with chemically dissimilar phases separated by a distinct interphase’. For various engineering applications GFRP composites are steadily replacing the metals...
An Ensemble Approach to Discovering Evolving Communities in the Multidimensional Social Network
Online Social network is growing to large extent to share information between the different diversity people around the world. The main objective of the proposed system to identify the community in the multidimensional...
A Study of Ring Gear Runout Checking Fixture
Fixtures are widely used in industries due to their quality of increasing the accuracy and minimizing the operational time. Inspection in manufacturing includes measuring, examining, testing, or gauging one or more cha...
Structural Analysis of Bicycle Structure and Improvement Analysis using Analytical and Finite Element Analysis
Bicycles are the common man mode of transportation for centuries. They are environmentally friendly and remote places can be easily accessed where road conditions are bad. Since it is essential member of common people,...