SIMULATION OF MULTICOMPONENT POLLUTION FLUID FILTERING PROCESS USING N-LAYER FILTERS
Journal Title: Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska - Year 2014, Vol 4, Issue 4
Abstract
In this article we considered and resolved the issue of incorporation of feedback of the process (the concentration of contamination of fluid and sediment) on the medium characteristics (porosity coefficient, filtration, diffusion, mass transfer, etc.) It was made during the simulation of cleaning fluid from multi impurities in n-ply sorption filter. We had retrieved algorithm numerically-asymptotic approximation solution of the corresponding model problem which is described by a system of nonlinear singularly perturbed differential equations convection-diffusion-mass transfer. On this basis,we made a corresponding computer experiment.
Authors and Affiliations
Andrij Safonyk, Oleksandr Naumchuk
Keywords
Related Articles
- EP ID EP73244
- DOI 10.5604/20830157.1130177
- Views 108
- Downloads 0
CALCULATION OF EXTERNAL EXPOSURE DURING DISMANTLING AND SEGMENTATION OF STEAM GENERATOR
The prediction of radiation doses obtained during dismantling of steam generator represents one of the most crucial issues within the processof decommissioning of nuclear installations. Given the fact that in Slovakia th...
DIAGNOSTYKA DOKŁADNOŚCI WSKAZAŃ MULTIMETRÓW CYFROWYCH
Opisano sposoby obliczania błędu maksymalnego dopuszczalnego (BMD) oraz jego dwóch składowych: multiplikatywnej (BDmul) i addytywnej(BDadd). Wyjaśniono zasady diagnostyki dokładności wskazań multimetrów. Zaproponowa...
K-MEANS CLUSTERING IN TEXTURED IMAGE: EXAMPLE OF LAMELLAR MICROSTRUCTURE IN TITANIUM ALLOYS
This paper presents an implementation of the k-means clustering method, to segment cross sections of X-ray micro tomographic images of lamellar Titanium alloys. It proposes an approach for estimating the optimal number o...
THE INFLUENCE OF THE TYPE OF SEPARATOR MATERIAL IN THE COMBINATION OF TWO BINARY STRUCTURES
The paper presents a simulation method of multilayers transmission and examines the impact of changes in the type and thickness of the material separating the two multilayer structures. For the analysis, the matrix metho...
FRACTAL GEOMETRIES IN LATERAL FLUX CAPACITOR DESIGN – EXPERIMENTAL RESULTS
Capacitance density is increased when lateral flux structures are used in CMOS technologies compared to classic parallel-palate capacitors. Lateral-flux capacitors where designed based on three different fractal geometri...