Simulation Study on the Effect of Different Reactor Schemes and Operating Conditions to Produce Gasoline by Naphtha Catalytic Reforming: Case Study of “X” Petroleum Refinery
Journal Title: Libyan Journal of Engineering Science and Technology - Year 2024, Vol 4, Issue 1
Abstract
The catalytic reforming process in gasoline production holds significant importance within the petroleum industry. Given its relevance, the primary focus of this study revolves around enhancing gasoline yield. Utilizing Aspen Hysys and Aspen Plus, the study aims to simulate gasoline enhancement through catalytic reforming. Specifically, it evaluates the impact of incorporating a third liquid phase reactor in the series on yield and production rate. The simulation outcomes closely align, with a deviation of less than 10% from plant data. With the validated model, further simulations explore various reactor configurations and operating conditions. Results indicate that aromatic yield escalates with rising reaction temperature and residence time, while reactor pressure demonstrates minimal influence on yield. In conclusion, integrating a liquid phase reactor into the catalytic reforming series holds promise for boosting gasoline yield and octane number. However, this approach necessitates adherence to more stringent operating conditions, with due consideration for safety protocols.
Authors and Affiliations
Moataz Ali Abdel-Samie Saleh ¹ , Rahel G Rahel ²
Keywords
Related Articles
- EP ID EP740320
- DOI -
- Views 47
- Downloads 1
Primary Characteristics of The Pre-Miocene Dykes in Ghanima Area, Western Part of Al Khums District, (NW Libya)
This work has been accomplished through field observations in conjunction with the information obtained from thin sections. Two samples was taken for petrographic analysis. These two dykes cut older rocks of Abu Shayb...
Computational Fluid Dynamics (CFD) and Static Structural Analysis (FEA) of an Aircraft Wing
In this study a CFD and static structural analysis of an aircraft wing have been carried out. An aircraft wing has been designed and modelled via the software SolidWorks and subsequently, structural analysis is carried o...
Assessment of Compliance with Good Hygiene and Manufacturing Practice: Case of the Artisanal Chocolate Factory
The present work concerns the investigation of the products of the artisanal chocolate company X (confidentiality reason). At the end of this survey, the company wishes to increase the notoriety of its brand on the whole...
Integration of Petrophysical and Sedimentological analysis of Aouinet Ouenine Formation, in South Wafa Field (NC169a), Ghadames Basin, Libya.
Geophysical and Wireline log analysis of the Middle Devonian Aouinet Ouenine F3 Sandston Member (main reservoir), in the south part of Wafa Field-NC169a (NW Libya), have been carried out on seven wells (A12,A13, A40,...
Experimental and Numerical Study of the Motion of the Carrier (NACA4412) through the Air Tunnel
The paper presents the numerical and experimental results obtained with the use of the FLUENT software for analyzing the carrier (NACA4412) motion through an air tunnel. This study will be considered as an alternativ...