SIMULATION TESTS OF ADAPTIVE CONTROL STRATEGIES FOR CNC MACHINE TOOLS
Journal Title: Journal of Machine Engineering - Year 2019, Vol 19, Issue 2
Abstract
The issue addressed in the article concerns the current needs and possibilities of computer-aided design of adaptive control strategies in machining processes. A simulative method of selecting the adaptive feed control strategy while rough turning materials difficult to machine, effective and inexpensive in its implementation, based on controlling the load placed on the machine's drives, has been presented. The results of a number of virtual tests of the proposed feed control strategy have been included, while paying particular attention to the stability of the machining process during moments of sudden change in the machining allowance. The obtained results meet the accepted quality indicators of the control algorithm. At the same time, the experiences collected by the author while conducting the tests confirmed the complexity of the issue and the resulting necessity to implement a comprehensive simulation testing program.<br/><br/>
Authors and Affiliations
Roman STRYCZEK, Wojciech SZCZEPKA
COMPENSATION OF SYSTEMATIC ERRORS OF DAMAGED PROBE FOR ON-MACHINE MEASUREMENT
Spatial characteristic of triggering radius of the damaged probe for the CNC machine tools has been presented. In such case a clear distortion of the probe performance characteristic and a significant increase in probe e...
COMPARISON OF CLASSIFICATION ABILITY INDICES OF PARAMETERS CHARACTERIZING THE STEREOMETRIC FEATURES OF TECHNICAL SURFACES
The study examined the relationship between the values of two indices evaluating the classification capacity of parameters characterizing the stereometric features of technical surfaces. The values of 83 3D parameters ch...
END MILLING OF TI-48AL-2CR-2NB UNDER HIGH-FEED CONDITIONS
Gamma titanium aluminides are fast developing materials and particularly in use for aerospace and automotive components. Due to the high cutting forces and raised cutting temperatures achieved during milling of this mate...
Application of bat-cell bio-ambient tests in exhaust gas emissions examinations for Euro 4 and Euro 6 combustion engines
The introduction of the subsequent European emission standards raises controversy among vehicle manufacturers and researchers. In order to meet the legal requirements, it is necessary to continually improve not only the...
INVESTIGATION OF LOCAL AND MODAL BASED ACTIVE VIBRATION CONTROL STRATEGIES ON THE EXAMPLE OF AN ELASTIC SYSTEM
Nowadays, feed axes are often equipped with multiple parallel-acting actuators in order to increase the dynamics of the machine tool. Also, additional actuators for active damping are widely used. Normally, the drives or...