Simulation tests of dynamics of vibroisolated railway lines with vibroisolating system based on elastomer elements
Journal Title: Autobusy. Technika, Eksploatacja, Systemy Transportowe - Year 2019, Vol 227, Issue 1
Abstract
The problem of propagation of vibration waves caused by the movement of rail vehicles in the ground is extremely important from the point of view of environmental protection against negative effects of dynamic impacts caused by rail transport. Therefore, there is a need to develop new methods for analyzing dynamic phenomena related to rail vehicle traffic. One of the methods that can be used to evaluate dynamic interactions is modeling using finite elements. The article presents a dynamic analysis of the track structure model and the impact of the application of its vibroisolation system on the level of ground vibration amplitude associated with the propagation of vibration waves from the track. The application of the finite element method allows for the analysis of the behavior of engineering structures in variable operating conditions dependent primarily on the speed of movement of vehicles on the track. Such analysis includes the use of a number of physical values that can be used to assess the impact of vibration on any engineering object. These values include, above all, acceleration at any measuring point on the measurement cross-section from the track to the engineering construction, e.g. a residential or industrial building as well as displacement or stress, which are dependent on the speed of the rail vehicle. Comparison of these values with generally available criteria and standards allows at the stage of designing the engineering structure for appropriate modifications to the substructure construction to limit the amplitude of the vibrations transmitted to the environment. These modifications consist mainly of the use of an appropriate vibroisolation system in the form of, for example, slabs or mats laid in the rail layer or pads underneath. Correct execution of the simulation requires careful preparation of the numerical model as well as a series of input data. The input data relate mainly to accurate material data concerning both engineering structures (bridges, viaducts, tunnels), rolling stock and soil parameters. Such data allow to prepare a spectrum of forces loading the modelled section of the track. This approach to the design process is particularly important due to the inability to modify the track after built it.
Authors and Affiliations
Jarosław Bednarz, Jan Targosz
Keywords
Related Articles
- EP ID EP576813
- DOI 10.24136/atest.2019.026
- Views 57
- Downloads 0
Badanie wpływu zastosowania powłoki Ti-Al-Cr-N na stan powierzchni elementów sprężarki chłodniczej
Elementy ruchowe sprężarek chłodniczych, mogą być narażone na różnego rodzaju procesy zużywania. Obecność czynnika chłodniczego powoduje, iż właściwości smarne i przeciwzużyciowe mieszaniny olej – czynnik są dużo gorsze...
Projekt zautomatyzowanej wielozadaniowej hamowni silników BLDC
Paper discussed the conceptual project of BLDC motor test stand being a part of UAV power unit. The aim of the project is to make a station for measuring power unit performance parameters. Following parameters will be an...
Parametry pracy turbodoładowanego silnika ZI samochodu osobowego w warunkach nieszczelności układu wydechowego
Paper discussed the influence of exhaust system leakage on the utility parameters and toxic combustion products emission of a turbocharged passenger car spark ignition engine. A comparative analysis of the data gathered...
Koncepcja wózka inwalidzkiego wysokiej mobilności z hydrostatycznym układem napędowym
The article presents the concept of a high mobility wheelchair with a hydrostatic drive system .It presents existing solutions of manually driven wheelchair and external powered solutions. It was proposed original drive...
Źródła energii elektrycznej – w aspekcie problemów rozwoju elektromobilności
W artykule omówione zostały problemy związane ze źródłami energii, niezbędnej do rozwoju elektromobilności w Polsce. W Polsce elektrownie najczęściej są zasilane węglem brunatnym, kamiennym i gazem, czyli tzw. energią cz...