SISTEM KONTROL OTOMATIS PENGISIAN CAIRAN DAN PENUTUP BOTOL MENGGUNAKAN ARDUINO UNO Rev 1.3
Journal Title: Electro Luceat - Year 2019, Vol 5, Issue 1
Abstract
The system design test results are obtained that when the sensor detects an object with a certain distance, the sensor will issue a signal to the micro which is then forwarded to the charging driver circuit to turn on the relay. The relay functions as a switch or switch that will fill the liquid in the bottle, when the driver is charging on, the process of filling the liquid occurs in the bottle, and the micro filling process issues a signal in the active motor driver circuit. The conveyor driver is active after giving a signal from Arduino Uno, the conveyor will stop after the sensor detects a bottle then stops, and the micro sends a signal to turn the motor driver down on the bottle cap to close the bottle on. When the bottle closing process is complete the motor driver backs up actively moving the road conveyor back. The percentage error of theoretical value and measurement of the difference is small and when filling the liquid in a bottle takes 17 seconds until the bottle is fully filled and by using the micro, the liquid filler on the bottle and the bottle cover can be completed properly.
Authors and Affiliations
Sonny Rumalutur, Serli Allo
Keywords
Related Articles
- EP ID EP615477
- DOI 10.32531/jelekn.v5i1.129
- Views 75
- Downloads 0
ANALISIS KENDALI SENSOR CAHAYA PADA MODUL LIFT 5 LANTAI MENGGUNAKAN PLC OMRON TIPE CP1E30
PLC (programmable logic controller) pada dasarnya adalah sebuah komputer yang khusunya di rancang untuk mengantikan sistem berbasis relay. Dengan menggunakan PLC perancangan sistem masing-masing memiliki jumlah yang berb...
TEMPERATURE AND HUMIDITY MOISTURE MONITORING SYSTEM WITH ARDUINO R3 AND DHT 11
This study discusses how to design an AC (Air Conditioner) system that can work based on the temperature and humidity of the room that is regulated by a system that uses Arduino UNO as a controller. Meanwhile, to measure...
SISTEM AUTOMATIC SWITCH REDUNDANT UPS UNTUK BEBAN ESSENSIAL
The role of the power supply device is to produce, process and distribute energy sources. Telecommunication equipment can only operate if it has continuous supply. Therefore, to maintain the continuity of the supply, a U...
STUDI OPTIMALISASI KUALITAS SISTEM CATU DAYA TERINTEGRASI PADA PT. TELKOM STASIUN BUMI SORONG
Sistem catu daya pada industri Infokom menggunakan konfigurasi yang cukup rumit agar menjamin kehandalan dan kelangsungan catu daya itu sendiri, dengan digunakannya beberapa perangkat yang bersifat induktif seperti recti...
DESIGN AND DEVELOPMENT OF PROTOTYPE PROTOTYPE CONTROL SYSTEM USING DISTANCE SENSORS
The research carried out aims to create an electric motor speed control and braking system that is used as a reference for electric car safety systems. By regulating the voltage received by a DC motor.  ...