Slaughterhouse wastewater treatment by combined anaerobic baffled reactor and anaerobic filter: study of OLR and HRT optimization in ABR/AF reactors
Journal Title: UNKNOWN - Year 2018, Vol 5, Issue 3
Abstract
Background: Slaughterhouse wastewater (SWW) is hardly treated due to the large amount of organic matter, nutrients and suspended solids. These materials are naturally decomposed through biological processes, and then environmental pollution, transmission of pathogens and problems become smelled. Conventional purification methods require high investment costs, high energy consumption and expert workforce. Therefore, the efficient and sufficient treatment of SWW with low cost, efficient construction and operation is important. Methods: A combined anaerobic system consisting of three pilot-scale anaerobic baffled reactors (ABRs) in the first stage and three anaerobic filters (AFs) were used to treat SWW. The ABR reactors arranged at three hydraulic retention times (HRTs) of 12, 18 and 24 hours and organic loading rates (OLRs) of 4, 7 and 10 kg/m3/d. The OLR applied for ABR reactors, was 0.5 to 1.55 kg COD/m3/d. Results: Evaluation of the ABR reactor indicated that this reactor at OLR of 7 and 10 kg COD/m3/d and HRT of 18 hours, had removal efficiency of 83.29% and 85.79%, respectively. AF reactor, at OLR of 0.981, 0.576 and 0.561 kg COD/m3/d and HRT of 36 hours, had removal efficiency of 79.39%, 74.09% and 63.14%, respectively. Conclusion: The optimum HRT and OLR were 24 hours and 7 kg COD/m3/d and 36 hours and 1 kg COD/m3/d in ABR and AF reactor, respectively.
Removal of blue cat 41 dye from aqueous solutions with ZnO nanoparticles in combination with US and US-H2O2 advanced oxidation processes
Background: The purpose of the present study was to assess the efficiency of ultrasound/hydrogen peroxide processes and ultrasound/hydrogen peroxide/ZnO nanoparticles in the removal of blue cat 41 dye from aqueous soluti...
An assessment on dispersion of carbon monoxide from a cement factory
Background: Modeling the dispersion of pollutants from factory stacks addresses the problem of matching emissions of a cement plant with the capacity of the environment to avoid affecting the environment and society. The...
Effect of UV light on pentachlorophenol removal in the electro- Fenton process
Background: This research studied the effect of UV light on pentachlorophenol (PCP) removal in the electro-Fenton (EF) process. Methods: PCP was used as the pollutant in this study. The effects of Fenton’s reagent, i.e....
Evaluation of quality of urban life with emphasis on health; A case study in Mashhad city
Background: The quality of life of the citizens is one of the most important issues studied in different countries and used in the planning and monitoring of public policies. The present study measured and evaluated the...
An environmentally friendly soil improvement technology for sand and dust storms control
Background: Dust storms occur when unchecked, strong, or turbulent winds combine with exposed loose and dried soil surfaces. Sand and dust storms have a significant impact on society, economy, and environment at local, r...