An environmentally friendly soil improvement technology for sand and dust storms control
Journal Title: UNKNOWN - Year 2019, Vol 6, Issue 1
Abstract
Background: Dust storms occur when unchecked, strong, or turbulent winds combine with exposed loose and dried soil surfaces. Sand and dust storms have a significant impact on society, economy, and environment at local, regional, and global levels. The environmental and health hazards of such storms cannot be permanently reduced, however, by taking appropriate measures, its impact can be reduced. The present study aimed to investigate the effects of microbial precipitation of calcium carbonate (CaCO3) as a biocompatible agent on soil stabilization and control of dust storms using urease-producing bacteria (UPB) as a biological improvement technique, which were isolated, identified, sprayed on the soil surface. Methods: For this purpose, the erosion of bio-cemented soil samples was investigated experimentally in a wind tunnel under the condition of wind velocity of 0 to 98 km.h-1 in two soil types with sandy and silty texture in a completely randomized design with three replicates. Results: The investigation of the threshold wind velocity of soil particles showed that soil particles began to move at velocity of 8 and 10 km.h-1 in silty and sandy soils, respectively, but in all biological samples (MICP), particles did not move until the wind speed reached 97 km.h-1. It was also revealed that the weight loss of all MICP-treated samples at different wind velocities was significantly reduced compared to the control group. Differences in the amount of soil loss among bio-cemented samples and control treatments were even superior at higher velocities, so that at velocities more than 57 km.h-1, soil losses increased significantly in the control group, while in soils treated with bacteria, soil loss was very low (about 2.5 kg.m-2.h-1). Comparison of the bacteria used in this study also showed that Bacillus infantis and Paenibacillus sp3 had high efficiency in controlling dust storms. Conclusion: The formation of abrasion-resistant surface layers on soil samples treated by bio-cementation showed that cementation by biological methods could be an effective way to stabilize surface particles and control sand and dust storms.
Authors and Affiliations
Sareh Rajabi Agereh, Farshad Kiani, Kazem Khavazi, Hassan Rouhipour, Farhad Khormali
Keywords
Related Articles
- EP ID EP515914
- DOI 10.15171/EHEM.2019.07
- Views 104
- Downloads 0
Removal efficiency of nitrate, phosphate, fecal and total coliforms by horizontal subsurface flow-constructed wetland from domestic wastewater
Background: Constructed wetlands are systems designed based on the utilization of natural processes, including vegetation, soil, and their associated microbial assemblage to assist in treating diļ¬erent types of wastewate...
Prediction of the waste stabilization pond performance using linear multiple regression and multi-layer perceptron neural network: a case study of Birjand, Iran
Background: Data mining (DM) is an approach used in extracting valuable information from environmental processes. This research depicts a DM approach used in extracting some information from influent and effluent wastewa...
Slaughterhouse wastewater treatment by combined anaerobic baffled reactor and anaerobic filter: study of OLR and HRT optimization in ABR/AF reactors
Background: Slaughterhouse wastewater (SWW) is hardly treated due to the large amount of organic matter, nutrients and suspended solids. These materials are naturally decomposed through biological processes, and then env...
Optimization of nitrogen and phosphorus removal from meat processing wastewaters using microalgal biofilms
Background: The conventional activated sludge processes are not able to completely treat the nitrogen and phosphorus compounds of meat processing wastewaters. Microalgal biofilm, which has the advantages of easiness and...
Assessment of water supply system and water quality of Lighvan village using water safety plan
Background: Continuous expansion of potable water pollution sources is one of the main concerns of water suppliers, therefore measures such as water safety plan (WSP), have been taken into account to control these source...