slugInvestigation on the Effect of Process Parameters For EN31 material By EDM using full factorial method
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2014, Vol 2, Issue 5
Abstract
This paper presents the results of experimental work carried out in electrical discharge machining (EDM) of EN31 using tool materials namely aluminium The machining process was carried out at three different supply current levels (17Amps, 21Amps, 28Amps) , pulse-on time (45μsec, 55μsec, 65μsec), and pulse off time (30μsec, 45μsec, 60μsec) their influence on surface roughness, material removal rate, tool wear rate. The optimal setting of the parameters are determined through experiments planned, conducted and analyzed using the full factorial method. Key words: Electrical discharge machining (EDM) . Material removal rate, surface roughness, tool wear ratio. Full factorial method, and Design Expert7.01.
Authors and Affiliations
Vaibhav Darji, Prof Yashesh. A. Darji
Keywords
Related Articles
- EP ID EP18003
- DOI -
- Views 284
- Downloads 10
Optimization of Drilling Process Parameters: A Review
Drilling is one of the widely used machining processes for various purposes. Now a days it is frequently used in automotive, aircraft and aerospace and dies or mold industries, home appliances, medical and electrical eq...
slugReducing Energy Consumption a nd Processing Time i n Mobile Sensor/Robot Networks
In the existing system, to maintain the network connectivity distributed partition detection a lgorithm which quickly makes the sensors aware of the partitioning in the network. This process is led by the sensors whos...
Success Prediction of Films at Box Office Using Machine Learning
Feature films are a multi-billion industry. Here prediction of a movie’s success is predicted based on its features like cast, genre of movie, month of release, run time, directors, producers etc. Based on multiple such...
A Novel Design of Low Power Comparator through Differential Amplifier in 90nm CMOS Technology Using Cadence Tool
In digital world, Speed, area, power are very vital parameters for high speed devices like analog to digital converters. The comparator circuit with preamplifier increases the power consumption, as it requires large amo...
Design and Analysis of Exhaust Manifold in Diesel Engine
This project aims in re-designing an exhaust manifold by determining the thermal stresses and deflections exhibited under various operating conditions with different materials and temperatures. The objective is to ensur...