STABILITY AND LOAD BEARING CAPACITY OF A BARS WITH BUILT UP CROSS SECTION AND ELASTIC SUPPORTS
Journal Title: Civil and Environmental Engineering Reports - Year 2015, Vol 1, Issue 16
Abstract
The present paper is devoted to the numerical analysis and experimental tests of compressed bars with built–up cross section which are commonly used as a top chord of the roof trusses. The significant impact on carrying capacity for that kind of elements in case of out-of-plane buckling is appropriate choice of battens which are used to provide interaction between separate members. Linear buckling analysis results and nonlinear static analysis results, with material and geometrical nonlinearity, are presented for the bar with built-up cross section which was used as the top chord of the truss made in reality. Diagonals and verticals which are supports for the top chord between marginal joints were replaced by the elastic supports. The threshold stiffness (minimum stiffness) for the intermediate elastic supports which ensures maximum buckling load was appointed for the beam and shell model of the structure. The magnitude of limit load depended on length of the battens was calculated for models with initial geometric imperfections. The experimental tests results for the axially compressed bars with builtup cross section and elastic support are presented.
Authors and Affiliations
Marcin KRAJEWSKI
Keywords
Related Articles
- EP ID EP239688
- DOI -
- Views 141
- Downloads 0
MEASUREMENT DATA PROCESSING WITH THE USE OF ART NETWORKS
ART (Adaptive Resonance Theory) networks were invented in the 1990s as a new approach to the problem of image classification and recognition. ART networks belong to the group of resonance networks, which are trained with...
COMPOSTING AND FERMENTATION OF BIOWASTE - ADVANTAGES AND DISADVANTAGES OF PROCESSES
In 2016, in EU Member States (EU), only less than half of the biowaste produced, i.e. around 40 million tonnes, was used to produce compost and, to some extent, biogas. Most of it was still incinerated or stored together...
Selected models for the description of the kinematics of changes of height differences between points in a geodesic network under the influence of mining
The article attempts to describe the progress of deformation of the surface of the Legnica-Głogów Copper Mining Area in the years 1967-2008. The state of deformation has been described with kinematical models of the disp...
ADAPTATION OF THE SOUTH-WEST WING OF COLLEGIUM CHEMICUM OF ADAM MICKIEWICZ UNIVERSITY IN POZNAŃ FOR STORAGE FACILITIES
The article refers to the problems of adaptation of Collegium Chemicum facilities belonging to Adam Mickiewicz Uniwersity in Poznań to its storage needs. The subject building is situated in Grunwaldzka Street in Poznań....
NUMERICAL ANALYSIS OF DEFLECTIONS OF MULTI-LAYERED BEAMS
The paper concerns the rheological bending problem of wooden beams reinforced with embedded composite bars. A theoretical model of the behaviour of a multi-layered beam is presented. The component materials of this beam...