Stacked Design of Parasitically Gap Coupled Square Patches for Enhance the Antenna Bandwidth

Abstract

A stacked arrangement of square patch antenna is proposed and analyzed in this paper. An antenna is designed by using glass epoxy-FR4 substrate. In the proposed stacked arrangement there are two patches: driven (lower) patch & parasitic (upper) patch, both patches having the same dimension. There is an air gap of 1 mm between these two patches. The driven patch is fed through probe feed with sub miniature version A (SMA) connector and the upper structure is parasitically coupled to the driven patch. Simulation results which are presented in this paper are return loss, input impedance, voltage standing wave ratio (VSWR) and 2-D radiation pattern. Simulation process is done by using IE3D simulator. Simulation results of stacked arrangement are compared with single square patch antenna of same size. This proposed antenna operates at two resonant frequencies and also has a relatively broad impedance bandwidth (33.74%).

Authors and Affiliations

Pallavi Shrivastav| M.Tech. Scholar, RIET, Jaipur Rajasthan, India, Khushboo Gupta| Assistant Professor, Bengaluru, Karnataka, India

Keywords

Related Articles

Space Time Block Coding for MIMO Systems With Low Decoding Complexity

MIMO systems with multiple antenna elements at both link ends are an efficient solution for future wireless communications systems as they provide high data rates by exploiting the spatial domain under the constraints of...

Design Of Digital FIR Filter Using LUT Based Multiplier

In FPGA design the implementation fir filters for DSP applications place an important role. The FPGA area is mainly decided by the number of LUT’s occupied. Hence for any design if the optimisation for the area is car...

User Driven Feedback Control System driven using CAN Protocol

Industrial automation is a sector having vast possibilities for major improvements. The system described in this paper consists of a console master computer (CMC) which will monitor various physical nodes usually found i...

Optimal Quantum Measurement Design on Speech Signal: Blind Minimax Estimator Improving MSE Over LS Estimators

We consider the problem of estimating an unknown, deterministic speech signal parameters based on quantum measurements corrupted by white Gaussian noise. We design and analyze blind minimax estimator (BME), which consist...

Digitally Programmable Four Phase Quadrature Oscillator in Current Mode

A simple technique is presented to realize a digitally programmable current mode four phase quadrature oscillator using MOCCII. The realized oscillator enjoys the attractive features of digital tuning, low component c...

Download PDF file
  • EP ID EP8420
  • DOI -
  • Views 348
  • Downloads 23

How To Cite

Pallavi Shrivastav, Khushboo Gupta (2014). Stacked Design of Parasitically Gap Coupled Square Patches for Enhance the Antenna Bandwidth. International Journal of Electronics Communication and Computer Technology, 4(5), 741-744. https://europub.co.uk/articles/-A-8420