Static Characteristics of Pressure Control Valve
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2017, Vol 67, Issue 1
Abstract
The article deals with the measurement of static characteristics of a pressure control valve. The pressure, at which the valve starts to leak oil, is adjusted by a spring. The measurement is performed on a hydraulic system that consists of tank, hydraulic pump, check valve, relief valve and pressure control valve which is measured. The results of this experimental measurement are Δp - Q characteristics of the pressure control valve for various pressure settings.
Authors and Affiliations
Ondřej Vykoukal, Lumír Hružík and Adam Bureček
Keywords
Related Articles
- EP ID EP43910
- DOI https://doi.org/10.1515/scjme-2017-0012
- Views 184
- Downloads 0
The Effect of the Free Surface on the Singular Stress Field at the Fatigue Crack Front
Description of stress singularity in the vicinity of a free surface is presented. Its presence causes the retardation of the fatigue crack growth in that region and fatigue crack is being curved. Numerical model is used...
Analysis of Pharmaceutical Excipient MCC Avicel PH102 Using Compaction Equations
This paper focuses on the characterization of the tabletting process and analysis one of the most common pharmaceutical excipients MCC Avicel PH102 by Heckel, Kawakita, Cooper-Eaton and Adams compaction equations. Expe...
Numerical Simulation of Heat Transfer Behavior of Dissimilar AA5052-AA6061 Plates in Fiction Stir Welding: An Experimental Validation
Fiction Stir welding (FSW) a unique type of metal joining process in solid state, where the heat generation takes place due to the friction action between the rotating tool and the work piece. It is generally used to j...
The Effects of Piezoelectricity Matrix Constants on the Charge of a Thin Membrane
This article is devoted to the comparison of the influence of the piezoelectric matrix properties on the magnitude of the resulting charge when a thin piezoelectric membrane of circular cross section, made from alumini...
Simulation Process Deep Drawing of Tailor Welded Blanks DP600 and BH220 Materials in Tool With Elastic Blankholder
The high-strength steels and tailor welded blanks (TWB) are applied in construction of cars parts to reduction of cars weight [1, 2]. The application of these materials brings possible complicatons during the forming w...