STATICAL EXPERIMENTS OF TIRE AS COMPLEX LONG-FIBRE COMPOSITE FOR OBTAINING MATERIAL PARAMETERS AND DEFORMATION CHARACTERISTICS
Journal Title: Materials Engineering - Materialove inzinierstvo (MEMI) - Year 2012, Vol 19, Issue 3
Abstract
The article deals with the statical experiments of tires for obtaining material parameters and deformation characteristics by tensile testing machine and also special statical testing tire machine. The tires consist of polymer matrix – rubber and long-filament reinforcement – cords, hence the tires are fall within as very complex long-fibre composite with specific deformation characteristics. These tire deformation characteristics have given geometry shape of tire and material parameters of component parts of tire-casing. Nowadays the computational modeling is used for tire solutions and experiments are subsidiary only. But the combination of computational modeling with experimental approach is necessary to use for prediction real states of tires. For computational modeling of tires the material parameters of each component part of tire-casing are necessary as material input data for computational models. These material parameters can be obtained by tensile test by statical testing machine. The geometry parameters of multi-layer test specimens of steel-cord belt with conditions of tensile tests are designed. The data from statical deformation characteristics are necessary for comparison of computational outputs with experimental data. The special testing tire machine called statical adhesor is used to obtain deformation characteristics and information about contact patches with pressure distribution in contact patches. The experimental results of chosen radial tire 245/40 R18 for passenger car are presented in this article. In this paper a new formula for calculating of value of radial stiffness is designed too.
Authors and Affiliations
Jan Krmela, Libor Beneš, Vladimíra Krmelová
Keywords
Related Articles
- EP ID EP114357
- DOI -
- Views 87
- Downloads 0
Influence of process parameters on torsional strength, impact toughness and hardness of dissimilar AISI 304 and AISI 1021 friction welded steels
In this present study an attempt was made to join austenitic stainless steel (AISI 304) with low alloy steel (AISI 1021) at different rotational speeds and at different axial pressures and then determining the strength o...
FRACTURE BEHAVIOUR OF P/M Cr-V LEDEBURITIC STEEL WITH DIFFERENT SURFACE ROUGHNESS
The samples made from the Vanadis 6 PM ledeburitic tool steel were surface machined to different quality and heat treated by standard regime of the processing. Three point bending tests were carried out on processed samp...
Static and dynamic tensile characteristics of DP600 steel sheets
Dynamic tensile testing of sheet steels is becoming more important. Experimental dynamic tensile technique is depending on the strain rate. Each serves for a specific range of strain rates and provides specific type of i...
[sub][/sub][sub][/sub]PROPERTIES OF PLASMA AND HVOF SPRAYED COATINGS
The article compares the properties of plasma and HVOF thermally sprayed coatings obtained by blending the NiCrBSi and Fe2O3 powders. The deposition was performed by means of the Plancer PN-120 and the Diamond Jet guns f...
EVALUATION OF THE FLOW ACCELERATED CORROSION OF COPPER PIPES
Corrosion behavior of the Cu pipe system has been investigated by long term experiment. The two identical experimental systems were made and fulfilled by the solution of 3 % NaCl. The work medium in the first system was...