Stiffness behavior of hybrid laminated composites with surface crack
Journal Title: Archives of Materials Science and Engineering - Year 2016, Vol 80, Issue 2
Abstract
Purpose: The purpose of this paper investigates to stiffness behavior of hybrid laminatedcomposites with surface crack.Design/methodology/approach: Hybrid laminated composites has 18 layers and 90x25mm size with two different layers line up. The low velocity impact test of hybrid laminatedcomposites carried on 3 m/sec with a/t=0.4 and a/c=0.4 surface crack parameters.Findings: The results are presented as the change of force-time and force-displacementgraphs. As a result of this study, effects of stacking sequence on hybrid composite plateswere analysed.Research limitations/implications: The research of stiffness behavior or dynamicresponse of hybrid laminated composites can contribute to developing new compositematerials.Practical implications: These hybrid laminated composites materials could be used fordifferent aviation areas.Originality/value: This paper is based on studies from Selçuk University and all theexperiments and results were conducted by me.
Authors and Affiliations
A. Güneş, Ö. A. Şahin
Keywords
Related Articles
- EP ID EP189900
- DOI 10.5604/18972764.1229632
- Views 78
- Downloads 0
Temperature changes influenced by different types of light curing units during polymerization of resin-based dental composite materials
Purpose: of this study was to evaluate the influence of LCU type on temperature changesduring polymerization of two resin-based composites with different matrices (silorane-basedand methacrylate-based).Design/methodology...
Mathematical model for determining the expenditure of cooling and lubricating fluid reaching directly the grinding zone
Purpose: The purpose of this article is to discuss the method of determining the mathematical model used for calculating the amount of emulsion reaching directly the grinding zone during the hob...
The structure and properties of aluminium alloys matrix composite materials with reinforcement made of titanium skeletons
Purpose: The aim of the article is to present the technology of the manufacturing ofcomposite materials with aluminum alloys matrix with reinforcement made of titaniumskeletons. This paper presents the structure and prop...
Visualisation of ankle injury using a thermal imaging camera
Purpose: This paper is dedicated to the study of the impact of multiple ankle injuries onblood flow in the lower limb.Design/methodology/approach: The study was performed using a thermal imagingcamera which by differenti...
Effect of plastic deformation rate at room temperature on structure and mechanical properties of high-Mn austenitic Mn-Al-Si 25-3-3 type steel
Purpose: The aim of the paper is to determine influence of plastic deformation rate at room temperature on structure and mechanical properties of high-Mn austenitic Mn-Al-Si 25-3-3 type steel tested at room temperature....