Stress analysis of ceramic lined, composite or steel Jacketed Pressure Vessels
Journal Title: International Journal of Advances in Engineering, Science and Technology - Year 2011, Vol 1, Issue 1
Abstract
Stress analysis of ceramic-lined cannon pressure vessels is described, for a S13N4 or SiC liner and A723 steel or carbon-epoxy jacket and with an initial residual interface pressure between liner and jacket and pressure applied to the bore. Room temperature stresses for a steel jacket over ceramic are similar to those for a carbon-epoxy jacket, but both radial and hoop jacket stresses can exceed typical carbon-epoxy strength values. Elevated temperature liner stresses are reduced for a carbon-epoxy jacket, due to the effective increase in interface pressure caused by differential thermal expansion. Critical crack sizes for brittle fracture are generally very small, although larger for Si3N4 than SiC due to lower liner stresses and higher fracture toughness for Si3N4.
Authors and Affiliations
K. V. S. Seshendra Kumar , B. S. K. Sundara Siva Rao
Keywords
Related Articles
- EP ID EP150460
- DOI -
- Views 119
- Downloads 0
Stress analysis of ceramic lined, composite or steel Jacketed Pressure Vessels
Stress analysis of ceramic-lined cannon pressure vessels is described, for a S13N4 or SiC liner and A723 steel or carbon-epoxy jacket and with an initial residual interface pressure between liner and jacket and pressure...
Influence of succinic acid on the corrosion inhibition of Sodium metavanadate in chloride medium
The inhibition efficiency (SMV) – succinic acid system is controlling corrosion of carbon steel in an aqueous solution containing 60 ppm of Cl- has been evaluated by weight loss method.250 ppm of SMV has 56% of IE. Addit...
Different Control Algorithms for Single- Phase UPQC-a simulation study
This paper employs a single-phase unified power quality conditioner (UPQC), an integration of shunt and series active power filters (APFs), for power factor correction and mitigation of voltage and current harmonics. Bot...
Aerodynamic Design of a HAWT Blade for Indian Wind Condition
Wind turbine works by converting the kinetic energy of the wind into electrical energy that can be supplied. Present work gives an optimization method for blade of VESTAS 1.65 MW horizontal axis wind turbine according to...
Financial and economic crisis creates new data on the electricity for remote consumers: Case study Greece
The financial and economic crisis in Greece has brought new taxes on the fossil fuels. During the depression (January 2009 – June 2011) the diesel-oil price was rising more than 65%. The aim of this study is to investiga...