Stress-strain state of the lower traverse of the hydraulic press
Journal Title: Журнал інженерних наук - Year 2018, Vol 5, Issue 1
Abstract
In the present article the stress-strain state of the lower traverse of the central ejector of the hydraulic press for manufacturing large-sized plastic products has been investigated by using finite element analysis. It has been established that the stress-strain state of the traverse is characterized by a general and local uneven distribution of stresses and deformations; normal stresses in the cross section, passing through the plane of symmetry of the traverse, change linearly. Various changes of the equivalent stresses along the height on the inner surfaces of the central and lateral cylinders have been established. The zones of the traverse that are experiencing the highest values of normal and tangential stresses and strains have been identified. The research allowed to change the geometry of the traverse with a slight change in the stress and strain and therefore to reduce the weight of the traverse. This investigation and its results will have practical application in the design of new hydraulic presses as well as in improvement of existing hydraulic presses and are also the basis for further research.
Authors and Affiliations
S. I. Nemchynov, I. I. Nachovnyi
Keywords
Related Articles
- EP ID EP412428
- DOI 10.21272/jes.2018.5(1).d1
- Views 78
- Downloads 0
Application of Rough TOPSIS Technique for the Analysis of Engineering System Failure Causes
The prioritization of the causes of engineering system failure posed to be a challenge. Therefore, there is a need to develop a tool that will be used to identify critical problems of an engineering system to facilitate...
Speech activity detection for the automated speaker recognition system of critical use
In the article, the authors developed a method for detecting speech activity for an automated system for recognizing critical use of speeches with wavelet parameterization of speech signal and classification at intervals...
Experimental simulation of diamond grinding of internal sphere in sapphire
Insufficient crack growth resistance and durability of sapphire or ceramic materials are essential short coming which complicates their application in total human arthroplasty. One possible approach of elimination of thi...
Modelling of Separation and Air Classification Processes of Aerodisperse Systems in the Shelving Device
The following paper considers the process of classification of polydisperse free-flowing material according to granulometric composition using a gravitational air classificator. There were considered the problems of the...
Analysis of the application of the galvanic circuits in schemes of the catodic protection for underground papelines
The possibility of using anode earthing in an assembly with a container is considered. Ensuring the integrity of the pipeline is a topical issue in connection with the environmental and economic consequences. The process...