Modelling of Separation and Air Classification Processes of Aerodisperse Systems in the Shelving Device
Journal Title: Журнал інженерних наук - Year 2018, Vol 5, Issue 1
Abstract
The following paper considers the process of classification of polydisperse free-flowing material according to granulometric composition using a gravitational air classificator. There were considered the problems of the purity of separation of polydisperse bulk materials and methods for increasing the degree of separation of particles. There were presented and analyzed obtained the results of the comparison, the data of experimental research and computer simulation of two-phase hydrodynamics flow by CFD methods. The versatility of this complex allowed carrying out simulation of the process using various parameters. As a result, were obtained optimal operating parameters, which were experimentally verified. Based on the obtained data as a result of numerical modelling, the possibility of increasing gas flow influence to the polydispersed material were found, as well as organization along the walls of coarse fraction downward flow by dint of the optimizing the devise design (specifically through the organization of additional inlets for airflow) were obtained.
Authors and Affiliations
D. A. Varukha, V. A. Smirnov, M. Edl, M. M. Demianenko, M. P. Yukhymenko, O. O. Liaposhchenko
Keywords
Related Articles
- EP ID EP412457
- DOI 10.21272/jes.2018.5(1).f2
- Views 93
- Downloads 0
Solving the Nonstationary Problem of the Disperse Phase Concentration during the Pneumoclassification Process of Mechanical Mixtures
The article dials with studying of the gas-dispersed systems classification process in gravitation pneumoclassifiers of prismatic shape. The aim of the research is to determine operating parameters of the investigated pr...
Analysis of the dynamic state of the system "fixture – workpiece"
In this article the vibrations of the “fixture – workpiece” system arising during the cutting process at various manufacturing steps under machining of levers in different fixture systems were investigated by means of nu...
Investigation of critical frequencies of the centrifugal compressor rotor with taking into account stiffness of bearings and seals
In this paper the implementation of the mathematical model for rotor free oscillations of centrifugal machines is considered with the use of the computer program “Critical frequencies of the rotor”. The advantage of the...
Overview of Control Techniques for Multicellular Converter
The structure multicellular converters, which appeared at the beginning of the 1990s, makes it possible to share the constraints in tension and it also improves the harmonic contents of the wave forms. To benefit as well...
Influence of the Wall Thickness Value on the Cross Wall Thickness Deviation of Tubes Rolled on the Tube Rolling Plant with the Continuous Mill
The high requirements as to accuracy of the wall thickness are due not only to necessity of assuring the reliability and serviceability of equipment, but also to the trend towards the continuous decrease of metal capacit...