Overview of Control Techniques for Multicellular Converter
Journal Title: Журнал інженерних наук - Year 2018, Vol 5, Issue 1
Abstract
The structure multicellular converters, which appeared at the beginning of the 1990s, makes it possible to share the constraints in tension and it also improves the harmonic contents of the wave forms. To benefit as well as possible from the large potential of the multicellular structure, an appropriate distribution of the voltages crossing each cell is needed. These converters are drastically used in industry as well as in research. One of the main limitations of these converters is unregulated supply of voltage and current. To overcome these problems there are various control techniques used in combination with these converters. In this review we summarized few of these control techniques. Some well known control techniques are PID, sliding mode control and Petri nets control. We have also paid attention on the advantages and disadvantages of these techniques with basic operating principle.
Authors and Affiliations
P. Djondiné
Keywords
Related Articles
- EP ID EP412450
- DOI 10.21272/jes.2018.5(1).e3
- Views 90
- Downloads 0
Research of the Energy Characteristics of Municipal Solid Waste in Cherkassy
The waste management system of Ukraine, is being reformed to bring it in line with European standards for the use of the material and energy potential of waste. Selection of the optimal system should be based on the stat...
Optimization of controlled damages on the recognition in the master education
Information considered extreme learning algorithm is able to study decision support system as part of the automated control system combined heat and power unit with optimized control tolerances recognition. Within the fr...
Compression Ignition Engine Performance as a Function of the Fuel Properties
Compression ignition engines have wide application in the transportation, agricultural, construction and industrial sectors which are critical for the economic sustainability of any nation. These engines are powered with...
Finite Element Analysis of Orthogonal Cutting Forces in Machining AISI 1020 Steel Using a Carbide Tip Tool
Force modeling in metal cutting is important for various purposes, including thermal analysis, tool life estimation, chatter prediction, and tool condition monitoring. Numerous approaches have been proposed to model meta...
Research of Mechanical Properties of Thermite Material on the Basis of Steel Dross
Important direction in the development of technologies for the recycling of wastes of industrial productions is inclination on the use energy saving technologies. The article deals with general aspects of methods of util...