Increased Wear Coatings due Intrastructural Self-Correction
Journal Title: Журнал інженерних наук - Year 2019, Vol 6, Issue 1
Abstract
A mechanism for blocking and subsequent annihilation of endogenous microcracks due to their intrastructural self-correction has been proposed. It has been established that during tribomechanical processes of friction interaction under conditions of additive influence of temperature fluctuations and specific loads in the contact zone, all possible factors take place simultaneously, from the point of view of physicochemical anomalous transformations in the solid phase, as a result of which thermal destruction of carbides and the formation of structurally free α-graphite. The test results prove that the anti-friction surface layer, which contains graphite, is formed in the run-in regime. The composition and the equilibrium roughness of the surface layer are reproduced and maintained throughout the normal range of wear, and also form an integral system of dynamically stable wear-resistant structures.
Authors and Affiliations
V. P. Babak, Ye. Yu. Bilchuk, V. V. Shchepetov
Keywords
Related Articles
- EP ID EP627301
- DOI 10.21272/jes.2019.6(1).c3
- Views 58
- Downloads 0
Cleaning and disposal of gas emissions from the production of calcinated soda ash
The article is devoted to the issues of reducing the negative impact on the environment of the production of soda ash, which is achieved by reducing the formation of gas and dust emissions, as well as their deeper cleani...
Static calculation of the dynamic deflection elements for separation devices
The following paper considers the influence of acoustic oscillations on multiphase flows on their suspended particles, which can be destroyed or coagulated by vibrations. Considering this, the method of extension of appl...
Comprehensive Approach for Identification of Nonlinear Stiffness Characteristics of Bearing Supports for the Oxidizer Turbopump of the Liquid Rocket Engine
This article dials with the refinement of the mathematical and computational models of the oxidizer turbopump rotor considering bearing gaps, axial preloading, compliance of the housing parts and the effect of rotation....
Diamond Grinding the Ceramic Balls from Silicon Carbide
The influence of the machining regime was experimentally investigated on the output indexes of the diamond grinding the ceramic balls from silicon carbide, such as the rate of the material removal and the rate of changin...
Kalman Filter Based Controlled Online System Identification
In the development of model predictive controllers a significant amount of time and effort is necessary for the development of the empirical control models. Even if on-line measurements are available, the control models...