Systematic Presentation of Ritz Variational Method for the Flexural Analysis of Simply Supported Rectangular Kirchhoff–Love Plates
Journal Title: Журнал інженерних наук - Year 2018, Vol 5, Issue 2
Abstract
In this work, the Ritz variational method for solving the flexural problem of Kirchhoff–Love plates under transverse distributed load has been presented systematically in matrix form. An illustrative application of the matrix presentation was done for simply supported rectangular Kirchhoff–Love plate under uniformly distributed load. The application used a one term Ritz approximating displacement (coordinate, or basis) function. A one term Ritz approximate solutions obtained for center displacement of square plates showed a difference of 1.9 % from the exact solution for displacement. Solution obtained for the bending moment at the center showed a difference of 7.9 % from the exact solution for bending moment. The one term Ritz approximation for the maximum shear force showed a difference of –10.7 % from the exact solution. The results obtained for a one term Ritz approximation of the displacement shape function was reasonably close for practical purposes.
Authors and Affiliations
C. C. Ike
Spline shaft hob cutter accuracy increase by the means of theoretical profile approximation by the circle involute section
One of the most wide spread and efficient spline shafts manufacturing methods is their cutting by the means of generating process by hob cutters. In this case, hob cutter’s theoretical profile, taking in to account its i...
Optimization of joint recycling process of drilling sludge and phosphogypsum
Joint recycling of drilling sludge and phosphogypsum with obtaining a building material is environmentally appropriate and cost-effective, as it helps not only to prevent environmental pollution, but also to solve the pr...
Compression Ignition Engine Performance as a Function of the Fuel Properties
Compression ignition engines have wide application in the transportation, agricultural, construction and industrial sectors which are critical for the economic sustainability of any nation. These engines are powered with...
Alternative technology to manufacture bimetallic products by using self-propagating high temperature synthesis
Electric welding is usually used for surfacing metal products. This process may be laborious and timeconsuming, which at the same time excludes welding jointing throughout the product surface. The productivity of powder...
Mathematical Modeling of the Mechanical Characteristic of the Activated PTFE-Matrix Using the Method of Planning the Experiment
In this paper, the influence of the parameters of the technological process of mechanical activation on the physical characteristics of the polytetrafluoroethylene (PTFE) matrix is investigated. The paper presents a math...