Structural, electrical, thermal, mechanical properties and micro-hardness in Sn-based Sn-Pb-Al ternary alloys
Journal Title: Cumhuriyet Science journal - Year 2017, Vol 38, Issue 4
Abstract
The structural, electrical, thermal, mechanical properties and micro-hardness of five different samples of Sn-Pb-Al ternary alloys (Sn-[x] wt. % Pb-10 wt. % Al) (x=40, 30, 20 and 10) with constant Al concentrations, and the eutectic Sn-Pb-Al (Sn61.82Pb38.10Al0.08) ternary alloy were investigated. The electrical conductivity of the samples, depending on temperature, was measured using the four-point probe technique (4PPT). The temperature dependence of the thermal conductivities of the samples was shown using the Wiedemann-Franz (W-F) law with the data obtained from electrical measurements. Scanning Electron Microscope (SEM), X-ray diffraction (XRD), and Energy Dispersive X-ray Analysis (EDX) measurements were carried out to reveal the surface morphology, crystal structure, cell parameters, grain sizes, and chemical compositions. Tensile tests were carried out to determine the ultimate tensile strengths depending on the particle size of each component in the alloys. The results of the micro-hardness tests were found using a Vickers test machine for each component of the alloys.
Authors and Affiliations
Canan ALPER BİLLUR, Mehmet ARI, Tuncay KARAASLAN, Buket SAATÇİ
Keywords
Related Articles
- EP ID EP488334
- DOI 10.17776/csj.341093
- Views 59
- Downloads 0
Iron Interstitial Defects Stability: Under the Uniaxial Stress Effect
Understanding of defect kinetics under stress fields is important for multiscale modeling of nuclear materials degradation. By means of molecular dynamics (MD) simulation, the formation and migration energies were evalua...
The Investigation of Mechanical Properties of the Flash Welded Different Steel Bars
In this study, three type steel bars were selected as experimental specimens. The steel types are S235JR (St37), S355JR (St52), AISI 304 stainless steel. Experimental parameters are material type and weld current. The sp...
Thickness Dependent Dielectric Loss of Plasma Poly (Ethylene Oxide) Films
Dielectric properties of plasma poly (ethylene oxide) (pPEO) thin film samples were investigated at room temperature. The thin film samples with different thicknesses were deposited by plasma assisted physical vapor depo...
Consistent Empirical Physical Formula Construction for Gamma Ray Angular Distribution Coefficients by Layered Feedforward Neural Network
Multipolarities of gamma rays and spins-parities of nuclear states are usually investigated by the angular distribution of gamma rays emitted from aligned states formed by nuclear reactions. For different multipolarities...
Growth of Cu2ZnSnS4 Thin Films Using Moderate Annealing Temperature and Short Dwell Time
In this study CZTS thin films were fabricated by a two-stage process that sputter deposition of metallic Cu, Zn, and Sn on Mo coated glass substrates and annealing process at 500 °C using various short dwell times (4, 8,...