Studies Concerning Energetic Consumption of Some Heating Equipments with Resistors
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2007, Vol 30, Issue 2
Abstract
In order to increase the resistance of aluminium alloys a complex heat treatment is usually performed. Therefore, we must consider the reaction time between aluminium alloys and furnace atmosphera. These atmospheres contain oxygene and nytrogene. Aluminium is an active element, therefore the oxidation is a very fast one.From the experiments made, the oxidation kinetics of aluminum alloys proves to depend on many factors, such as: temperature, alloy activity, chemical saturation and partial pressure of oxygen in gaseous phase. For a heat treatment process, the oxidation time became heating time. The furnace design provides to minimize the losses by untights and to realise a uniform air stream in the furnace chamber. These facts are going to minimise the oxide layer of the treated parts. For the studied furnaces, used at aluminum alloys heat treating, the functioning curves were first made. It must be mentioned that all experiments were made in different days, in order to assure the same pre-heating conditions for the equipment. As a conclusion, studying the heat chamber geometry is a step forward to a new concept of heat treatment furnaces. This idea leads to important economical effects, on a long term, for a constant development of the industry.
Authors and Affiliations
Alina MINEA, Roxana CARABET
Keywords
Related Articles
- EP ID EP662359
- DOI -
- Views 68
- Downloads 0
Ni-P Coating on Steel Support by Electroless Method
The autocatalytic reduction method (electroless method) was applied to obtain the Ni-P layers with different P contents. Nickel sulfate was used as nickel ion source and as reducing agent the sodium hypophosphite. The su...
Study of Heat Treatment Influence on Aluminum - Based Alloy ATN-Si10Cu4
This work presents the experimental results concerning the behavior on heat treatment of on aluminum based alloy. The laboratory level experiments achieved on samples of ATN-Si10Cu4 (4145 series) alloy illustrate the va...
Aspects of Nitrated Layer Structure for Some Types of Austenite Stainless Steel
The analysis of nitrated layer diffractograms and the structure marked out the presence of complex nitrides combinations layer for all types of steel except for code 6 steel type 2CuMoNiCr200 which because of the very hi...
Some Aspects Regarding the Elaboration of Multiple Precessional Gear Theory and Modern Manufacturing Technology
The engineering complex study of the triad “gear-technology-transmission” has permitted to elaborate a new type of precessional transmissions with multicouple gear. In this paper, the authors present the mathematic model...
Severe Plastic Deformation an Advanced Method for Nanostructuring Shape Memory Alloys
Severe plastic deformation (SPD) is an advanced plastic deformation. In this process nanostructuring metals and alloys may be produced. Nanostructured shape memory alloys are associate with a very high strength, toughnes...