Study of Ionic Liquids UV-VIS and FTIR Spectra before and after Heating and Spruce Groundwood Dissolution
Journal Title: Fibres and Textiles in Eastern Europe - Year 2019, Vol 27, Issue 1
Abstract
The absorption of 1-butyl-3-methylimidazolium chloride and acetate taken from commercial packaging was studied by means of UV-VIS and infrared spectroscopy with some differences observed. Further research showed that heating both 1-butyl-3-methylimidazolium chloride and acetate alone, as well as in the presence of wood pulp, causes the darkening of these ionic liquids. Changes in the colour of ionic liquids associated with a variation in the absorption characteristics of pure ionic liquids and wood solutions in these liquids in UV and visible light are expressed primarily in the widening of the absorption bands. The presence of coloured products formed during their heating, as well as dissolution of the chemical components of wood in ionic liquids, had relatively little effect on the position of individual absorption bands in the spectrum obtained by the FT-IR method. The small differences in the absorption of spruce groundwood solutions in ionic liquids in IR as compared to pure ionic liquids suggest that strong chromophore groups in ionic liquids are created without serious reconstruction of their structure.<br/><br/>
Authors and Affiliations
Dariusz Danielewicz, Magdalena Kmiotek, Barbara Surma-Ślusarska
Keywords
Related Articles
- EP ID EP413808
- DOI 10.5604/01.3001.0012.7515
- Views 64
- Downloads 0
Static and Fatigue Strength of Linear Textile Products
This publication is a review of the work directed or inspired by the late Professor Andrzej Włochowicz in comparison to the current state of knowledge, and developed by his colleagues as an expression of memory and recog...
LMPP Effects on Morphology, Crystallization, Thermal and Mechanical Properties of iPP/LMPP Blend Fibres
The thermal properties and morphological characterisation of isotactic polypropylene (iPP) homopolymer and its blends with low molecular low modulus polypropylene (LMPP) were studied. Firstly blends were prepared with va...
Functionalization of Non-woven Viscose with Formulation of Chitosan and Honey for Medical Applications
The aim of this research was to develop the formulation of chitosan in combination with honey in different mass proportions of each of the components within the separate mixture. Such a formulation could serve as a funct...
Effect of Microwave Irradiation on the Physical Properties and Structure of Silk Fibre
Microwaves are high frequency radio waves which are capable of penetrating many materials and causing heat to be generated in the process. To investigate the effect of microwave irradiation on the physical properties as...
Biocidal Agent for Modification of Poly(lactic acid) High-efficiency Filtering Nonwovens
The article presents research on the development of modified poly(lactic acid) (PLA) melt-blown nonwovens for construction of respiratory protection devices (RPD) against biological hazards. Due to this specific applicat...