Study of modification of magnesium hydroxide bonded with lauric acid and application in PE<br />
Journal Title: Science Paper Online - Year 2008, Vol 3, Issue 6
Abstract
Magnesium hydroxide (Mg(OH) 2) microparticles are nontoxic and can be prepared as a flame retardant for polymer, but they do not have good compatibility in polymer materials because of their high polarity. In order to improve their compatibility, Mg(OH)2 microparticles readily react with lauric acid to give C-O-Mg bond. The synthesis process of a novel Mg(OH) 2- lauric acid microparticle is described. The modified magnesium hydroxide is characterized by FT IR to prove that lauric acid is bonded to Mg(OH) 2 surface. Mg(OH) 2 treated with lauric acid take a good performance in polyethylene (PE).
Authors and Affiliations
Hongchang PANG, Junwei YE, Junqiang LI
Keywords
Related Articles
- EP ID EP102198
- DOI -
- Views 99
- Downloads 0
用于界面对流模拟的格子Boltzmann方法
通过引入外力修正系数和界面对流强度，在介观尺度上运用格子Boltzmann方法模拟乙酸乙酯吸收二氧化碳传质过程的界面Rayleigh对流现象。基于实验测定的流场平均速度值来确定外力修正系数，在外力修正系数确定的条件下，进行了平均速度分析...
2-丁烯液态临氢异构制1-丁烯热力学分析
本文利用文献数据和Aspen Plus软件计算相结合的方法，在313.15~363.15 K的温度和0.7~1.6 MPa的压力范围内，研究2-丁烯液态临氢异构制1-丁烯体系的反应热力学特征。结果表明，双键异构反应为吸热反应，顺反异构反应为放热反应，但热效应不...
钴基催化剂费托合成动力学模型
由于钴基催化剂的活性组分为Co，反应中CO2的生成量很少，水煤气变换反应可不予考虑，所以钴基催化剂上烃的生成为主要反应。在费托合成碳化物机理的基础上，建立了烃生成的可能基元反应，以生成碳化物的基元反应为控制步骤，推导出8个钴基...
SiCf／Ti基复合材料的界面反应
SiC纤维增强Ti基复合材料（SiCf／Ti）在航空航天领域有重要应用前景，但在SiC纤维和基体钛合金之间存在的界面反应，使复合材料的性能受到一定的损害。本文采用透射电镜、扫描电镜和X射线衍射分析SiCf/Ti基复合材料界面反应产物的微观组织...
An algorithm to image-based pavement cracks<br /> geometry features extraction<br />
Conventional human-visual and manual pavement cracks detection method and approaches are not fit to the development of the highway any more, and they possess various drawbacks such as labor-intensive, time-consuming, tra...