The application of cone dynamic penetration test method to geotechnical exploration in gravel soils
Journal Title: Science Paper Online - Year 2008, Vol 3, Issue 7
Abstract
The heavy and super-heavy cone dynamic penetration test is an effective means to geotechnical exploration in gravel soils. But the results of cone penetration tests are often used just as qualitative parameters or reference values. Even though sometimes the results of cone penetration tests are used to obtain the bearing capacity and deformation parameters of soil foundation from the criterion tables，but these bearing capacity and deformation parameters are too larger than actual values to be used. Based on the principle of cone dynamic penetration test，a reasonable relationship between the dynamic penetration test results and the parameters of foundation soil mechanics is presented through analyzing the reason why dynamic penetration test results are often much larger than their normal values. Therefore, the cone dynamic penetration tests could be better applied to geotechnical engineering exploration.
Authors and Affiliations
Qifeng LI, Shouyun LIANG
Keywords
Related Articles
- EP ID EP96733
- DOI -
- Views 116
- Downloads 0
Multiple center grid resource monitor system based on cluster structure
Resource monitoring systems in a grid target on gathering, managing and maintaining all the resource information, which makes the system an essential part of the grid. This paper presents a multiple center grid resource...
柳园口灌区地下水流数值模拟<br /> 和水资源可持续利用<br />
本文建立了柳园口灌区的地下水流数值模拟模型，并用它探讨了灌区水资源可持续利用的策略。在柳园口灌区靠近黄河的灌区上游，作物通常由引黄水灌溉；而在离黄河较远的灌区下游，作物则是通过抽取地下水进行灌溉。灌区上游的田间渗漏是下游...
废旧阻燃电脑外壳的热解动力学
通过对含有四溴双酚A阻燃剂(tetrabromobisphenol A, TBBPA)的废旧电脑外壳（红外分析鉴定为丙烯腈-丁二烯-苯乙烯树脂，acryolonitrilr butadiene styrene, ABS）进行热裂解试验和动力学研究，得到不同升温条件下（5 K•min-1, 10 K•min-1,...
Microstructure and interface reaction of titanium alloys casting<br /> into different mould shells<br />
Special mould shells for precision-casting titanium alloys were prepared with the same binder and different mould shell materials of ZrO2 and Al2O3. Ti-6Al-2Zr-1Mo-1V(BT20), Ti-6Al-4V(TC4) and pure titanium (TA2) were me...
木薯渣的稀酸水解及用于丁酸固定化发酵
对木薯渣酸水解糖化的工艺条件进行了研究，考察了稀酸浓度、温度、时间及液固比对木薯渣酸水解的影响。结果表明：木薯渣经过稀硫酸处理，可以产生大量的还原糖。在正交实验得到的常压下和高压蒸汽下加热水解的最佳条件，还原糖得率都可达...