Study of Performance and Emission Analysis of Dual Biodiesel Fuelled on LHR Diesel Engine Supported by EGR System
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 6
Abstract
The present experiment deals the effects of Exhaust Gas Recirculation (EGR) system on the performance and emission characteristics of LHR engine using Manilkarazapota methyl ester-eucalyptus oil blends. The surfaces of the cylinder head, piston, exhaust and inlet valves of a four stroke direct injection, single cylinder diesel engine has been coated with partially stabilised zirconia (PSZ) by the plasma spray method. The coated engine was tested with the MZME30Eu70 (Manilkarazapota methyl ester 30% and Eucalyptus oil 70%), MZME30Eu70+10%EGR and diesel. The presence of EGR system creates low oxygen content for combustion and reduces the NOx emission. The graph depicts that addition of 10% EGR gives the best performance in BSEC, BSFC, BTE and emission wise when coupled with LHR engines. The brake thermal efficiency of PSZ-coated engine fuelled by MZME30Eu70 with EGR is 3.8% higher than that of uncoated engine fuelled with MZME30Eu70. Most notably NOx emission rate is decreased, by the presence of the EGR and BSFC is brought under acceptable limit.
Authors and Affiliations
Sivakumar Ellappan, Rahul Loganathan, C. Satyasandeep, M. Vishnuvardhan
Keywords
Related Articles
- EP ID EP257089
- DOI -
- Views 115
- Downloads 0
The Impact of the Thickness of the Porous Material on the Parallel Plate Channel Flow of Ree-Eyring Fluid when the Walls are Provided with non-Erodible Porous Lining
In this analysis the impact of the thickness of the permeable material on the parallel plate channel stream of ReeEyring liquid when the walls are furnished with non-erodible permeable lining is contemplated. The governi...
Optimization of Process Parameters on Thrust Force and Delamination Factor in Drilling of Carbon Fiber Reinforced Composites
The major objective of this work was to investigate a statistical model, based on Taguchi technique and to estimate the quality of drill in CFRP composite material prepared by hand layup technique. The design of experime...
Design and Implementation of an Architecture for a Remotely Operated PLC Laboratory Using Labview
In India, imparting practical knowledge about industrial automation to engineering students is still in its infancy. Technical facilities are available only at a few engineering colleges. As a result, it is necessary to...
Tool Wear Monitoring using NNge Algorithm
Cutting tools are required to do the necessary machining operations in the manufacturing Industry. Continuous machining operation causes the tool to degrade. The machining operation done using a worn-out tool will have a...
CHALLENGES OF EXPERIMENTING R1234YF REFRIGERANT FOR AUTOMOBILE HVAC SYSTEM – A REVIEW
New refrigerants are on the verge of hitting the automobile HVAC industry, on account of several threatening conditions. Zero ozone depletion potential (ODP) and low global warming potential are the major challenges look...