Study of the Inclusions from the Oriented Grains Silicon Steels and their Influence on the Texture
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2006, Vol 29, Issue 2
Abstract
The paper presents experimental results concerning the inhibitor phases generation by microalloying elements utilization. It was made experiments on three silicon steel charges. It was observed that the inhibitor phases have a strong influence on steel sheet structure and its texture. So these phases can by considered like “texture nucleus”.
Authors and Affiliations
Ana DONIGA, Elisabeta VASILESCU
Prediction of Work Parameters in a Cold Mill Using Neural Network
The accurate prediction of work parameters is essential for a quality product. A mathematical model is used for parameters calculus. It is important to directly predict the roll force and the other parameters and to comp...
Research on Abrasive Wear Behavior of Laser Cladding Layers of High - Speed Steel Powder Type HS6-5-2 - M2
The paper presents the wear behaviour on a rotating disk which carried abrasive paper of laser cladding layers with high-speed steel powder type HS6-5-2 - M2 compared to steel samples of the same quality but heat treated...
Aspects Regarding the Traceability in Temperature Measurements
The traceability of national standards to a reference measurement is essential to correctly translate the information about customer preferences described in international standards as a prerequisite which exists for the...
Influence of the Furnace Temperature in Continuous Flux Quenching on the Characteristics of Low Carbon Steel Straps
In this paper there are presented mechanical characteristics (resiliency, elongation) and structural characteristics resulted from quenching thermal treatment made on an experimental installation, in continuous flux, on...
Laser Surface Hardening of 51CrV4 Steel
The work presents the surface changes in microstructure and properties by quenching the 51CrV4 steel from liquid and solid phase, using a CO2 continue laser wave with 900W power. In order to determine the hardening condi...