Study of the lamb waves propagation along a plate in contact with a randomly inhomogeneous heterogeneous medium
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 5
Abstract
<p>We present results of research into the influence of characteristics of a heterogeneous medium on the Lamb wave propagation process parameters along a plate in contact with a given medium. A mathematical description of the Lamb wave propagation process in a metallic plate was formed. Analytical expressions are derived for determining the displacement potentials that describe, respectively, the longitudinal and transverse waves in a plate with a thickness of 2d at frequency ω. The possibility is shown of the existence under given conditions of a certain finite number of symmetric and antisymmetric Lamb waves. The mentioned waves are different one from another in phase and group velocities, as well as the distribution of displacements and stresses along the plate's thickness.</p><p>We have investigated dependence of the Lamb wave attenuation on the characteristics of fluid in contact with the propagation medium. In the case when the Lamb wave propagation medium borders the fluid and the speed of sound in liquid C<sub>l</sub> is less than speed C of the wave in a plate, the Lamb wave will attenuate radiating energy into liquid. It was established that the attenuation is due to the density of the studied medium. Viscosity and motion speed of a gas-containing suspension, for example iron ore pulp, have almost no effect on the magnitude of attenuation of the Lamb waves.</p><p>The significance of the obtained results is emphasized by the fact that they could be used to develop improved methods and tools to control parameters of gas-containing suspensions. The use of Lamb waves makes it possible to avoid measurement errors associated with the presence of microdefects at the surface of propagation and gas bubbles in the examined liquid.</p><p>From a practical point of view, the results obtained could be used for the calculation of parameters for the sources of ultrasonic waves in the systems of ultrasonic testing. Thus, there is an opportunity to improve efficiency of technological processes in the mining and metallurgical industry, specifically, the enrichment of ore.</p>
Authors and Affiliations
Vladimir Morkun, Natalia Morkun, Vitaliy Tron, Svitlana Hryshchenko
Keywords
Related Articles
- EP ID EP527761
- DOI 10.15587/1729-4061.2018.124057
- Views 47
- Downloads 0
“Smart” anticorrosion pigment based on layered double hydroxide: construction and characterization
<p>Paint coatings are widely used for decorative purposes and to prevent corrosion of metal surfaces. However, regular paint coating only provides passive protection of the metal. To create an active type of corrosion pr...
Improvement of reliability of fire engineering equipment based on a jet-niche technology
<p>The obtained results address the solution to problems on enhancing the reliability and operation efficiency of fuel consuming equipment at industrial and power engineering facilities in the course of low-cost moderniz...
Studying the mutual interaction of hydraulic characteristics of waterdistributing pipelines and their spraying devices in the coolers at energy units
<p>This analytical study is based on the results from hydraulic tests of spray nozzles for the mixing (waterjet) steam condenser at a thermal power plant's turbo generator. The work was performed at the stage of launch o...
An impact of the ladle lining on the refining of reinforced steel when blowing with powders
<p>When refining steel by blowing powders, the ladle lining material plays a serious role. The dependency graphs of the degree of desulfurization on the consumption of silicocalcium powder during blowing in ladles lined...
The development of methods for determining vibration stochastic fields of technological complexes
<p>The force effects occurring in technological complexes have been studied on the basis of the analysis of technical diagnostics system. Due to the distinction between deterministic and random force effects, there have...