Study on Minimizing CO2 Emissions in Clinker Unit of Cement Plant in Sultanate of Oman
Journal Title: GRD Journal for Engineering - Year 2017, Vol 2, Issue 8
Abstract
The design project of Chemical Engineering focus on solving the problem related to a chemical or process industry. The aim of the research paper is to establish study on gaseous emission in cement industry of Sultanate of Oman. The study was concentrated on testing numerous options that may help in dropping the amount of emission from cement plants especially carbon dioxide emission. As per the investigation the suggested technology was CO2 capture and it was effective in terms of cost and maintain the production amount. According to energy and mass balance of the plant it has been found that 8700 tons/day of clinker produces and 5206.08 tons /day of CO2 was generated. The analysis includes the design aspect for cyclone separator that has an efficiency of 42.7%.In addition, according to the feasibility study of this study it has been noticed that FCI of making plant produce 3.17 million ton/year was 4.2 million OMR. Moreover, according to the present investigation it has been identified that the solution for minimizing the emission couldn’t depend not only in method of production but also some alternative substitution for the parameters, raw material and process equipment used for production of cement.
Authors and Affiliations
Dr Lakkimsetty Nageswara Rao, Safa Ahmed Mohamed Al- Hinai
Keywords
Related Articles
- EP ID EP227613
- DOI -
- Views 84
- Downloads 0
Comparison of Privacy Preserving Biometric Schemes
Biometric verification is defined as the verification of a individual based on the physical, chemical or behavioral attributes of the person. To protect the biometric data containing privacy information, a number of priv...
Smart Traffic Control System
Traffic light control systems are widely used to monitor and control the flow of automobiles through the junction of many roads. However, the synchronization of multiple traffic light systems at adjacent intersections is...
Design and Production of Methane Gas from Food Waste Using Anaerobic Digestion
Biogas is one of beneficial and essential gas, which is widely used for the electricity, heat and transportation fuels. Biogas can be produced by digestion pyrolysis or hydro gasification. Digestion is a biological proce...
Mathematical Modelling of Switched Reluctance Motor
The SRM is a doubly salient machine with very high torque to inertia ratio and high fault tolerant capability. SRM is widely used in low, medium and high power drives and high speed drives. This paper describe a mathemat...
Seismic Control of Highway Bridges using Fuzzy Logic Control
Investigation of past years shows seismic pounding between successive bridge segment which is usually only of a few centimeters resulting significant structural damage. The aim of this paper is to investigate the possibi...