STUDY ON THE CHROME INFLUENCE ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF THE TUNGSTEN BASED ALLOYS
Journal Title: ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics, and Engineering - Year 2016, Vol 59, Issue 0
Abstract
In this paper we have presented the studies and the researches done by the authors on the chrome addition effect on the mechanical properties and microstructure of the heavy alloys from the W-Ni-Fe system. The experimental results have shown that the chrome addition up to 3 wt. % in the W-Ni-Fe system, have influenced the density, elongation and the yield limit of the sintered samples. These results could be explained by the segregation observed on the interphase boundaries between the W based matrix and the chromium compounds with the Ni, Fe and O elements. Also, an interphase corrosion is produced from where is explained the lowering of the mechanical properties analyzed.
THE PATH PLANNING OF TRR SMALL-SIZED ROBOT
After a brief definition of the robot path, the paper establishes the interpolation polynomials that characterize the displacement of the TRR small-sized robot on a path defined by five successive configurations. The sec...
AN ARTIFICIAL NEURAL NETWORK APPROACH TO ESTIMATE THE VISCOSITY OF BIODIESEL-DIESEL-ETHANOL BLENDS
In order to estimate the viscosity of biodiesel-diesel fuel-bioethanol blends viscosity data of 15 ternary blends - measured between 273.15 K and 343.15 K - were used. Two artificial neural networks, with one and two neu...
DYNAMICS EQUATIONS FOR A CAR INSPECTION MOBILE STRUCTURE
The paper is devoted to establishing the dynamics equations, by an analysis of kinematic and dynamic behavior, for a mobile robot, called RmITA. Based on geometric modeling of the structure, there will be determined the...
STUDY REGARDING THE VIBRATION TRANSMISSION OF THE AUTOVEHICLE ABOUT HUMAN BODY
The paper presents an experimental study regarding the transmissibility vibration about human body. These experimental studies include the vibrations measurements in the auto, after three axes. The paper presents only tr...
THE DYNAMIC MODEL OF RTTRR SERIAL ROBOT – ITERATIONS OUTWARDS AND INWARDS THE ROBOT’S MECHANICAL STRUCTURE
The paper presents the first part of the process of obtaining the dynamic model of RTTRR serial robot. After establishing the input data, the external forces and their moments are determined based on iterations outwards...