Study On The External Gas-Assisted Mold Temperature Control For Thin Wall Injection Molding
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 3
Abstract
Dynamic mold surface temperature control (DMTC) has many advantages in micro-injection molding as well as thin-wall molding product. In this paper, DMTC will be applied for the thin-wall molding part with the observation of the weldline appearance and the weldline strength. The heating step of DMTC will be achieved by the hot air flow directly to the weldline area. The results show that the heating rate could be reached to 4.5C/s, which could raising the mold surface from 30C to over 120C within 15 s. The melt filling was operated with high temperature at the weldline area; therefore, the weldline appearance was eliminated. In addition, the weldline strength was also improved. The results show that the thinner part had the higher strength of the weldline.
Authors and Affiliations
ThanhTrung Do, Tran Minh The Uyen, Pham Son Minh
Keywords
Related Articles
- EP ID EP390315
- DOI 10.9790/9622-0703021519.
- Views 144
- Downloads 0
Adaptive FANP And TOPSIS Method For Innovation Strategy Of Small Medium Enterprise (SME)
This study aims to determine the assessment and innovation strategy of SMEs based on the hybrid adaptive method of Fuzzy Analytic Network Process (FANP) and Technique for Order Preference by Similarity to Ideal Solution...
Comparison of Mechanical Properties of Bare and Stellite-21 Coated Aisi 316l, Sprayed By D-Gun Process
Present paper describes the mechanical properties of Stellite-21 coated AISI- 316LStainless steel. Specimens were coated using Detonation Gun thermal spray process,with different coating thicknesses of Stellite-21 rangin...
A Study on Properties of Paver Blocks Manufactured Using Different Percentage of Recycled Aggregates With Partial Replacement of Cement By Fly Ash”
The increasing difficulty in securing natural coarse for the production of concrete coupled with the environmental issues and social costs of unlimited extraction of natural aggregates makes the usage of recycled aggrega...
Electro-Disinfection of Municipal Wastewater: Laboratory Scale Comparison between Direct Current and Alternating Current
Electrodisinfection of wastewater has been investigated extensively in the past, although a consensus over the use of direct current (DC) or alternating current (AC) as the most efficient electricity source has not been...
Renewable Energy: The Future of Bangladesh
Electrical energy is versatile and considered as the back bone of our daily life. It is directly or indirectly used in everyone’s daily activities. But for having the availability of the sources, we cannot but depend on...